| | |
| | Read through all of the instructions before starting installation. Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation. Ensure that all tools stated in the instructions are available before starting installation. Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps. In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.
|
| | |
| | There may be parts in the accessories kit that are not needed for this installation. |
| | |
| | IMG-363036 |
|
| | Note! This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps. |
Used for focused component, the component with which you will do something. Used as extra colors when you need to show or differentiate additional parts. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc. Used when the component is not fully removed from the vehicle but only hung to the side. Used for standard tools and special tools. Used as background color for vehicle components.
|
| | |
| | IMG-394535 |
|
| | |
| | |
| | Note! The removal steps may contain installation details. |
|
| | IMG-412247 |
|
| | Note! Perform the procedure one side at a time. |
Use special tool: T9995919, PULLER (SEAL-PINION,CAM-CRANKSHAFT)B200-6304
|
| | IMG-383770 |
|
| | Disconnect the connector. |
| | IMG-427085 |
|
| | |
| | IMG-427066 |
|
| | |
| | IMG-427075 |
|
| | |
| | IMG-427080 |
|
| | Remove the panel. Disconnect the connector, if applicable. |
| | IMG-426962 |
|
| | |
| | IMG-426965 |
|
| | Release the lock. Repeat on the other side. Remove the marked part. |
| | IMG-426975 |
|
| | Caution! Make sure that the seat backrest upholstery (fold down position) is not damaged by contact with the floor! |
|
| | IMG-422099 |
|
| | |
| | IMG-417448 |
|
| | |
| | IMG-417449 |
|
| | |
| | IMG-417450 |
|
| | |
| | IMG-417451 |
|
| | |
| | IMG-417452 |
|
| | Remove the panel. Use hands only. |
| | IMG-415048 |
|
| | Note! The graphic shows the back of the component before removal. |
|
| | IMG-424577 |
|
| | Release the catch. Remove the marked part. |
| | IMG-417503 |
|
| | Remove the panel. Use hands only. |
| | IMG-417504 |
|
| | Remove the panel. Disconnect the connector, if applicable. |
| | IMG-417505 |
|
| | |
| | IMG-401577 |
|
| | |
| | IMG-401579 |
|
| | |
| | IMG-401580 |
|
| | |
| | IMG-401581 |
|
| | Remove the screws. Tightening torque: Front seat to body
, 40 Nm
|
| | IMG-417510 |
|
| | |
| | IMG-401583 |
|
| | Remove the screws. Tightening torque: Front seat to body
, 40 Nm
|
| | IMG-401584 |
|
| | |
| | IMG-396605 |
|
| | Disconnect the connector. |
| | IMG-396606 |
|
| | Unhook the cable harness clips. |
| | IMG-417535 |
|
| | |
| | IMG-394096 |
|
| | Remove the marked part. The part is to be reused. |
| | IMG-394081 |
|
| | Remove the screw. The part is to be reused. |
| | IMG-394105 |
|
| | |
| | IMG-394078 |
|
| | Disconnect the connector. |
| | IMG-427095 |
|
| | |
| | IMG-410210 |
|
| | |
| | IMG-411195 |
|
| | |
| | Vehicles with spare wheel |
| | IMG-411295 |
|
| | |
| | IMG-411296 |
|
| | |
| | |
| | IMG-427037 |
|
| | Remove the part carefully Use: Interior trim remover
|
| | IMG-411217 |
|
| | Disconnect the connector. Remove the marked part. |
| | IMG-411220 |
|
| | Remove the marked part. Use special tool: T9997606, Sleeve
Repeat on the other side. |
| | IMG-414161 |
|
| | |
| | Vehicles with keyless entry |
| | IMG-413321 |
|
| | Disconnect any connector(s). |
| | |
| | IMG-427035 |
|
| | |
| | IMG-427036 |
|
| | |
| | IMG-427040 |
|
| | |
| | IMG-411322 |
|
| | |
| | IMG-427055 |
|
| | |
| | IMG-427056 |
|
| | Remove the screw. Tightening torque: Cargo anchor, to body
, 13 Nm
|
| | IMG-424456 |
|
| | |
| | IMG-424462 |
|
| | |
| | IMG-427320 |
|
| | |
| | IMG-410325 |
|
| | |
| | IMG-410326 |
|
| | Fold the wing liner aside. |
| | IMG-410333 |
|
| | |
| | IMG-410335 |
|
| | Release the catch. Remove the marked part. |
| | IMG-410340 |
|
| | Remove the part carefully |
| | IMG-400000 |
|
| | Repeat the steps when removing on opposite side. |
| | IMG-410355 |
|
| | Raise the car. Remove the screws. |
| | IMG-410352 |
|
| | Note! This step requires the aid of another technician. |
Loosen the component indicated. Do not remove it. |
| | IMG-410370 |
|
| | Note! The number of connectors may vary depending on the vehicle's equipment level. |
Release the connector's catch. Disconnect the connector. |
| | IMG-410372 |
|
| | Caution! Place the Bumper Cover on a suitable surface. |
Remove the marked part. |
| | IMG-414276 |
|
| | Remove the marked part. The part is not to be reused. |
| | |
| | IMG-427100 |
|
| | Install component that comes with the accessory kit. |
| | IMG-427101 |
|
| | Install component that comes with the accessory kit. |
| | IMG-427315 |
|
| | Install component that comes with the accessory kit. |
| | Concerns US and Canadian markets. |
| | IMG-427106 |
|
| | Note! Make sure that the component is centred. |
Place the component where indicated in the graphic. |
| | IMG-420562 |
|
| | |
| | IMG-420563 |
|
| | Use a drill with the stated size |
| | IMG-427111 |
|
| | |
| | |
| | IMG-427350 |
|
| | Install component that comes with the accessory kit. |
| | Vehicles without parking assistance |
| | IMG-427112 |
|
| | Position/route the cable as illustrated. Install the cable. Use a cable tie |
| | IMG-427115 |
|
| | |
| | IMG-427116 |
|
| | Position/route the cable as illustrated. Install the cable. Use a cable tie |
| | Vehicles with parking assistance |
| | IMG-427117 |
|
| | Route the wire adjacent to existing wirings. Install the cable. Use a cable tie |
| | IMG-427118 |
|
| | Route the wire adjacent to existing wirings. Install the cable. Use a cable tie |
| | |
| | IMG-415360 |
|
| | Note! This step is easier with two people. |
Place the Bumper Cover in position for installation. |
| | Vehicles without aftermarket-installed Parking assistance |
| | IMG-415410 |
|
| | |
| | Vehicles with aftermarket-installed Parking assistance |
| | IMG-416938 |
|
| | Loosen the component indicated. Do not remove it. |
| | IMG-416915 |
|
| | |
| | IMG-416928 |
|
| | Use special tool: T9814203, Expander pliers
|
| | IMG-416935 |
|
| | Remove the marked part. The part is not to be reused. |
| | IMG-428060 |
|
| | |
| | IMG-416917 |
|
| | |
| | |
| | IMG-415415 |
|
| | Route the wiring harness into the passenger compartment. |
| | IMG-415420 |
|
| | Caution! Make sure that the rubber grommet seals properly to the body. |
|
| | IMG-415360 |
|
| | |
| | IMG-416707 |
|
| | |
| | Vehicles with Side Obstacle Detection Control SODL/SODR |
| | IMG-427120 |
|
| | Route the wire adjacent to existing wirings. Install the cable. Use a cable tie |
| | Applies to all other vehicles |
| | IMG-416776 |
|
| | Clean the surfaces. Use: , Isopropanol
|
| | IMG-417715 |
|
| | Use: 1161765, Primer
Allow to dry for at least 2 minutes, but no more than 60minutes. |
| | IMG-427121 |
|
| | |
| | IMG-427122 |
|
| | Install the cable. Use a cable tie |
| | |
| | IMG-427123 |
|
| | Route the wire adjacent to existing wirings. Install the cable. Use a cable tie |
| | IMG-427325 |
|
| | Route the wire adjacent to existing wirings. Install the cable. Use a cable tie |
| | IMG-427191 |
|
| | |
| | IMG-427326 |
|
| | Clean the surfaces. Position/route the cable as illustrated. Install the cable. Use tape |
| | IMG-427193 |
|
| | |
| | IMG-427195 |
|
| | |
| | IMG-427196 |
|
| | Route the wire adjacent to existing wirings. Tighten the cable ties. |
| | IMG-424059 |
|
| | Position/route the cables as illustrated. |
| | IMG-424061 |
|
| | Note! Route the wire between floor carpet and air duct. |
Position/route the cables as illustrated. |
| | IMG-427203 |
|
| | |
| | IMG-427205 |
|
| | Position/route the cables as illustrated. Tighten the cable tie. |
| | IMG-427260 |
|
| | Route the wire adjacent to existing wirings. Tighten the cable ties. |
| | IMG-427266 |
|
| | Route the wire adjacent to existing wirings. Tighten the cable ties. |
| | Right-hand drive vehicles |
| | IMG-428066 |
|
| | |
| | |
| | IMG-427300 |
|
| | Position/route the cable as illustrated. |
| | IMG-427310 |
|
| | Connect the prerouted cable. |
| | Vehicles manufactured between chassis number 038841-057039 |
| | Note! Make sure that the vehicle has the latest software status |
|
| | |
| | IMG-242268 |
|
| | Download software (application) for the accessory's function according to the service information in VIDA. See VIDA or the accessories catalogue for software part number. |
| | |
| | IMG-400000 |
|
| | Reinstall the removed parts in reverse order. |