Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
V90 2018
V90 (17-) 2018

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
314288721.440002504, 40000922, 40000918, 40000970, 40000966, 40000962, 40000958, 40000954, 40000950, 40000946, 40000942, 40000938, 40000934, 40000930, 40000926, 40002500, 40000974
Side decor




 

Special tools

 

999 7390 Key

Tool number:999 7390

Tool description:Key

Tool boards:80

 

999 5919 PULLER (SEAL-PINION,CAM-CRANKSHAFT)B200-6304

Tool number:999 5919

Tool description:PULLER (SEAL-PINION,CAM-CRANKSHAFT)B200-6304

Tool boards:46


Materials

Designation

Part number

Primer

1161727

Tape


Equipment
IMG-345497
IMG-239667
IMG-268803

IMG-408470


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Further information

2
IMG-400007
 

After installation, the car must not be washed for 48 hours

When installing, the car must retain a temperature of 20 degrees C.

 

Color symbols

3
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Applies to unpainted component

4
IMG-408465
 
5
IMG-416196
 
 

Removal

6
IMG-408300
 

Remove the screws.

7
IMG-408302
 

Remove the screws.

8
IMG-408335
 

Open doors.

9
IMG-408330
 

Note!
The clips consist of two parts.

Loosen the clips.

10
IMG-408346
 

Loosen the clips.


Use special tool: T9997390, Key

11
IMG-408435
 

Loosen the clips.

Remove the marked part.

12
IMG-408455
 

Caution!
The part is to be reused.

Loosen the clips.

Remove the marked part.

13
IMG-408475
 

Note!
Make sure that the mating faces are clean and free of foreign material.


Use special tool: T9995919, PULLER (SEAL-PINION,CAM-CRANKSHAFT)B200-6304

 

Accessory installation

14
IMG-463189
 

Remove the protective film.

Repeat on the other side.

15
IMG-463217
 

Apply a thin layer of primer.

Use: 1161727, Primer

16
IMG-464810
 

Center the component using the middle control clip.

17
IMG-416195
 

Attach the component from the middle and outwards.

Ensure that all clips engage.

18
IMG-413213
 

Caution!
Use suitable tape to protect the components.

Use: , Tape

19
IMG-408520
 

Caution!
Make sure not to damage painted surfaces.


Note!
Note the position.

Install component that comes with the accessory kit.

20
IMG-408525
 

Press until a click is heard.

Ensure that all clips engage.

21
IMG-408542
 

Press until a click is heard.

Ensure that all clips engage.

22
IMG-408620
 

Press until a click is heard.

Ensure that all clips engage.

23
IMG-408635
 

Press until a click is heard.

Ensure that all clips engage.

24
IMG-413213
 

Remove the tape.

 

Installation

25
IMG-408630
 

Reinstall the removed part.

26
IMG-408631
 

Reinstall the removed part.

Ensure that all clips engage.

27
IMG-408632
 
28
IMG-408300
 

Install the screws.

29
IMG-408302
 

Install the screws.

30
 

Repeat all method steps for the other side.