Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
V60 2017
V60 (-18) 2017 D87PHEV L.H.D, V60 (-18) 2017 D97PHEV L.H.D

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
314287811.031339994
Parking assistance, camera, front. For Sensus Connect. (Plug-in Hybrid)




IMG-374543




 

Special tools

 

999 7390 Key

Tool number:999 7390

Tool description:Key

Tool boards:80

 

951 2932 Tension spring

Tool number:951 2932

Tool description:Tension spring

Tool boards:80

 

999 7482 Cutting tool

Tool number:999 7482

Tool description:Cutting tool

Tool boards:30


Materials

Designation

Part number

Electrical tape

Low temperature grease

1161427

Isopropanol


Equipment
IMG-242205
IMG-345497
IMG-300203
IMG-239667
IMG-244945
IMG-240675

IMG-380917


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

This instruction covers a Plug-In Hybride vehicle.

2
IMG-373194
 

Warning!
Observe caution when working near the high voltage system.

This car is equipped with a high voltage type electrical system.

Components in the high voltage system work with dangerous voltages.

These components are connected with orange wires.

 

Color symbols

3
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Removal

4
IMG-332193
 

Set the ignition key to position 0.

5
IMG-292804
 

Remove the panel.

6
IMG-292806
 

Fold the carpet to the side.

7
IMG-292823
 

Remove the cable harness clips.

Disconnect the connector.

8
IMG-292826
 

Remove the panel.

9
IMG-292827
 

Disconnect the connector.

10
IMG-345113
 

Carefully pry loose the bottom edge of the panel and then continue around the panel.

11
IMG-340590
 

Disconnect the connector.

12
IMG-340985
 

Remove the screws.

13
IMG-355818
 

Remove the screws.

 

Cars with automatic transmissions

14
IMG-293006
 
15
IMG-293007
 

Release the shift-lock function.

 

All vehicles

16
IMG-340981
 
 

Cars with manual transmissions

17
IMG-345292
 
 

All vehicles

18
IMG-340604
 

Disconnect the connector.

19
IMG-340605
 

Remove the screws.

20
IMG-340607
 
21
IMG-380815
 
 

Accessory installation

22
IMG-380819
 
23
IMG-380816
 

Install component that comes with the accessory kit.

 

Installation

24
IMG-341739
 
25
IMG-340605
 

Reinstall the screws.

26
IMG-340622
 
 

Removal

27
IMG-340988
 

Remove the screws.

28
IMG-340989
 
29
IMG-380933
 

Disconnect the connectors.

30
IMG-293021
 
31
IMG-293022
 
32
IMG-293023
 

Remove the screws.

33
IMG-377998
 

Remove the screws.

34
IMG-345746
 

Remove the panel.

35
IMG-374497
 

Detach the panel.

36
IMG-374495
 

Disconnect the connector.

 

Accessory installation

37
IMG-374547
 

Install component that comes with the accessory kit.

38
IMG-362040
 

Locate the existing connector in the vehicle's cable harness.

Connect the connector.

39
IMG-382650
 
40
IMG-374510
 

Tear off the excess foam tape.

Clamp the cables and connectors to the existing cables to prevent noise.

41
IMG-386020
 

Pull the wiring through.

42
IMG-380925
 
43
IMG-380941
 

Connect the prerouted cable.

44
IMG-380943
 

Connect the connectors.

45
IMG-385187
 

Fold the carpet to the side.

Locate the rubber grommet under the insulating mat.

46
IMG-385185
 

The part is not to be reused.

47
IMG-385193
 

Pull the wiring through.

Fold the floor carpet back.

 

Installation

48
IMG-377070
 

Reinstall the removed parts in reverse order.

 

Removal

49
IMG-385035
 

Place the tape so that it enters under the grille edge, protecting the painted area when removing the grille.

Use: , Electrical tape

50
IMG-385038
 

Note!
The graphic shows the back of the component before removal.

51
IMG-385133
 


Use special tool: T9997390, Key

52
IMG-385134
 

Pull the grille outwards with one hand and keep it there while undoing the next retainer hook.

53
IMG-385135
 
54
IMG-385049
 
55
IMG-374267
 
56
IMG-385055
 
57
IMG-385059
 

Remove the nuts.

 

Accessory installation

58
IMG-340606
 

Fold the insulation to one side.


Use special tool: T9512932, Tension spring

59
IMG-382096
 

Raise the car.

Remove the clips.

Remove the screws.

60
IMG-382097
 

Remove the clip.

Remove the screws.

61
IMG-385201
 
62
IMG-385183
 
63
IMG-353681
 

Use: Expander pliers

Use: 1161427, Low temperature grease

64
IMG-385204
 

Caution!
Make sure that the rubber grommet seals properly to the body.

65
IMG-385218
 

Use: , Electrical tape

66
IMG-385220
 

Pull the wiring through.

67
IMG-385257
 

Pull the wiring through.

Remove the Special Tool.

68
IMG-385271
 

Route the cable harness to the existing cable harness.

69
IMG-385294
 
70
IMG-385291
 
71
IMG-385299
 

Route the cable harness to the existing cable harness.

72
IMG-385312
 

Route the cable harness to the existing cable harness.

73
IMG-385317
 
74
IMG-385260
 
75
IMG-385262
 

Pull the wiring through.

76
IMG-385318
 
77
IMG-385368
 
78
IMG-385270
 
79
IMG-385320
 

Tighten the cable ties.

80
IMG-385324
 

Remove the tape.

Remove any traces of glue.

Use: , Isopropanol

81
IMG-375758
 

Caution!
Place the component on a suitable underlay or support.


Note!
Orientation view

82
IMG-385394
 

Note!
This step is easier with two people.

Use: Angle drill machine


Use special tool: T9997482, Cutting tool

83
IMG-375795
 


Use special tool: T9997482, Cutting tool

84
IMG-375753
 

Use: Angle drill machine


Use special tool: T9997482, Cutting tool

85
IMG-375800
 
86
IMG-347781
 
87
IMG-347786
 
88
IMG-374396
 
89
IMG-374391
 
90
IMG-385353
 

Connect the connector.

Reinstall the removed part.

91
IMG-377070
 

Reinstall the removed parts in reverse order.

92
IMG-242268
 

Download software (application) for the accessory's function according to the service information in VIDA. See VIDA or the accessories catalogue for software part number.

Order and download software according to: 31285245