Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
XC60 2016
XC60 (-17) 2016

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
313593531.131373766, 31373456, 31359368, 31373458, 31373455, 31359366
Bumper bar, front bumper




IMG-375145




 

Materials

Designation

Part number

Isopropanol

1161721


Equipment
IMG-345497
IMG-239660

IMG-375166


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Further information

2
 

When installing, the car must retain a temperature of 20 degrees C.

 

Color symbols

3
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used when the component is not fully removed from the vehicle but only hung to the side.

 

Applies to unpainted component

4
IMG-377449
 
5
IMG-377450
 

Caution!
First the paint must dry after painting.

Clean the surface.

Use: 1161721, Isopropanol

6
IMG-377453
 

Remove the protective film.

7
IMG-377451
 

Install component that comes with the accessory kit.

 

All vehicles

 

Removal

8
IMG-375159
 

Remove the screws.

9
IMG-375160
 

Remove the panel.

 

Accessory installation

10
IMG-375199
 
11
IMG-375204
 

Remove the protective film.

12
IMG-375162
 
13
IMG-375206
 
14
IMG-375205
 
15
IMG-375208
 

Drill the holes.

16
IMG-375224
 

Install the clips as illustrated.

Fold the protective film forward

17
IMG-375162
 
18
IMG-375528
 

Hint
Press and apply pressure to the part over the tape for at least 20 seconds.

19
IMG-375164
 

Install the screws.

Note position of components.