Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
V60 Cross Country 2019
V60 Cross Country (19-) 2019

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
316646371.131664635
Bumper cover




 

Materials

Designation

Part number

Isopropanol

Masking tape


Equipment
IMG-345497
IMG-397698

IMG-450887


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Conditions

2
IMG-400007
 

When installing, the car must retain a temperature of 20 degrees C.

After installation, the car must not be washed for 48 hours

 

Color symbols

3
IMG-400010
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

  7. Used for accessory components.

 

Preparation

4
IMG-450821
 

Open the tailgate.

5
IMG-450822
 

Clean the surface.

6
IMG-450823
 

Wipe off

Use: , Isopropanol

Allow to dry.

7
IMG-450835
 
  1. Use: Masking tape

  2. Mark the centre.

 

Accessory installation

8
IMG-450875
 

Mark the centre.

9
IMG-450910
 

Fold the protective film forward

10
IMG-450880
 

Place the component where indicated in the graphic.

Measure

Use: Vernier caliper

11
IMG-450882
 

Allow the Bumper Protection to adhere to the Bumper Cover as indicated.

Use: , Masking tape

12
IMG-450884
 

Remove the protective film.

13
IMG-450982
 

Remove the tape.

Pull off the rest of the transparent foil and press by hand on the Bumper protection to make it cling to the Bumper Cover.

14
IMG-450885
 

Thoroughly press, by hand, all over the Bumper Protection to make it cling properly.

15
IMG-450934
 

Remove the tape.

Remove the protective film.