Information

• Read through all of the instructions before starting installation.

• Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

• Ensure that all tools stated in the instructions are available before starting installation.

• Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

• In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

Conditions

There may be parts in the accessories kit that are not needed for this installation.

Color symbols

1. Used for focused component, the component with which you will do something.

2. Used as extra colors when you need to show or differentiate additional parts.

3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

4. Used when the component is not fully removed from the vehicle but only hung to the side.

5. Used for standard tools and special tools.

6. Used as background color for vehicle components.

Removal

On both sides.

On both sides.

Detach the panel.

On both sides.

Remove the screws.

Vehicles with parking assistance

Remove the cable tie(s).

Accessory installation

Vehicles with fixed towbar

Vehicles with detachable towbar

Vehicles with parking assistance

Locate the markings for the positions.

Locate the markings for the positions.

Use: 1161721, Isopropanol

Allow to dry.

Use: 8637076, Activator

Allow to dry for at least 10 minutes.

Clean the surface.

Use: 1161721, Isopropanol

Allow to dry.

Use: 8637076, Activator

Allow to dry for at least 10 minutes.

Remove the protective film.

Install component that comes with the accessory kit.

Install the cable.

All vehicles

Reinstall the removed parts in reverse order.