Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
V60 2017
V60 (-18) 2017

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
313054301.030756503
Net pocket, cargo compartment, side panel




IMG-342461




 
Equipment
A0000162
IMG-239660
IMG-239681

IMG-342462


 
  

INTRODUCTION

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Right-hand side

1
IMG-342335
 

Right-hand side

  • Drill out the hole.

2
IMG-342337
 

  • Insert the pocket's rear mounting in the hole in the panel and fold down.

3
IMG-342338
 

  • Insert the mesh pocket's front mounting towards the panel and lower end towards the floor.

  • Mark the hole in the panel level with the middle of the radius of the bent wire frame.

4
IMG-342339
 

  • Move the front mounting to one side and drill the hole.

5
IMG-342342
 

  • Insert the front mounting in the panel and fold down the mesh pocket.

6
IMG-344396
 

  • Hold the pocket against the panel and drill out the holes through the two clips.

7
IMG-344397
 

  • Tighten the mesh pocket's lower end.

 

Left-hand side

8
IMG-342464
 

Left-hand side

  • Drill out the hole.

9
IMG-342467
 

  • Insert the pocket's rear mounting in the hole in the panel and fold down.

10
IMG-342466
 

  • Place the net pocket as illustrated and move the front mounting towards the panel.

  • Make a mark with the scriber in the panel where the mounting is to enter.

11
IMG-342463
 

  • Move the net pocket to one side.

  • Drill out the hole.

12
IMG-342465
 

  • Install the net pocket.

13
IMG-344398
 

  • Hold the net pocket against the panel and drill out the holes through the two clips.

14
IMG-344399
 

  • Tighten the mesh pocket's lower end.