| | |
| | Read through all of the instructions before starting installation. Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation. Ensure that all tools stated in the instructions are available before starting installation. Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps. In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.
|
| | |
| | There may be parts in the accessories kit that are not needed for this installation. |
| | |
| | IMG-400010 |
|
| | Note! This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps. |
Used for focused component, the component with which you will do something. Used as extra colors when you need to show or differentiate additional parts. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc. Used when the component is not fully removed from the vehicle but only hung to the side. Used for standard tools and special tools. Used as background color for vehicle components. Used for accessory components.
|
| | |
| | IMG-361731 |
|
| | Remove the panel. Repeat on the other side. |
| | IMG-368970 |
|
| | Remove the panel. Repeat on the other side. |
| | IMG-449116 |
|
| | Remove the screw. Remove the marked part. |
| | IMG-449117 |
|
| | Use hands only. Repeat on the other side. |
| | IMG-370274 |
|
| | Remove the panel. Repeat on the other side. |
| | IMG-449118 |
|
| | Note! The graphic shows the back of the component before removal. |
|
| | IMG-368127 |
|
| | |
| | IMG-352822 |
|
| | Disconnect the connector. |
| | IMG-449122 |
|
| | |
| | IMG-356816 |
|
| | |
| | Cars with automatic transmissions |
| | IMG-369570 |
|
| | Release the shift-lock function. |
| | |
| | IMG-352899 |
|
| | Remove the part carefully |
| | IMG-352929 |
|
| | |
| | IMG-449125 |
|
| | |
| | IMG-449120 |
|
| | Detach the panel. Disconnect the connector. |
| | IMG-352901 |
|
| | |
| | IMG-449126 |
|
| | Remove the screws. Remove the marked part. |
| | IMG-380933 |
|
| | Note! The number of connectors may vary depending on the vehicle's equipment level. |
Disconnect the connectors. |
| | IMG-369020 |
|
| | Repeat on the other side. |
| | Vehicles with heated rear seat |
| | IMG-369022 |
|
| | |
| | IMG-369029 |
|
| | Locate the connector. Disconnect the connector. Repeat on the other side. |
| | |
| | IMG-372960 |
|
| | |
| | IMG-449339 |
|
| | Repeat on the other side. |
| | IMG-449342 |
|
| | Remove the marked part. Remove the screws. Repeat on the other side. Tightening torque: Front seat to body
, 40 Nm
|
| | IMG-449372 |
|
| | Repeat on the other side. |
| | IMG-449373 |
|
| | Release the catch. Remove the marked part.
Use: Electrician's screwdriver
Repeat on the other side. |
| | IMG-449380 |
|
| | Remove the screws. Repeat on the other side. Tightening torque: Front seat to body
, 40 Nm
|
| | IMG-449407 |
|
| | Repeat on the other side. |
| | IMG-449408 |
|
| | Loosen the screws. Disconnect the connector. Repeat on the other side. |
| | IMG-449411 |
|
| | Remove the screws. Fold marked part aside. Tightening torque: M6
, 10 Nm
|
| | IMG-449414 |
|
| | |
| | IMG-449415 |
|
| | |
| | IMG-449421 |
|
| | |
| | IMG-449424 |
|
| | |
| | IMG-449444 |
|
| | Use hands only. Loosen the component indicated. Do not remove it. Disconnect the connectors. |
| | IMG-449430 |
|
| | |
| | IMG-451091 |
|
| | Remove the screws. Fold marked part aside. Tightening torque: M6
, 10 Nm
|
| | IMG-451092 |
|
| | |
| | IMG-449128 |
|
| | |
| | IMG-449130 |
|
| | Note! The graphic shows the back of the component before removal. |
|
| | IMG-449131 |
|
| | |
| | IMG-449139 |
|
| | Note! The graphic shows the back of the component before removal. |
|
| | IMG-369033 |
|
| | |
| | IMG-368833 |
|
| | |
| | IMG-449670 |
|
| | |
| | IMG-449672 |
|
| | |
| | IMG-449541 |
|
| | |
| | IMG-360944 |
|
| | Repeat on the other side. |
| | IMG-449158 |
|
| | |
| | IMG-449160 |
|
| | Note! The graphic shows the back of the component before removal. |
|
| | IMG-369939 |
|
| | |
| | IMG-449163 |
|
| | Note! The graphic shows the back of the component before removal. |
|
| | IMG-369944 |
|
| | |
| | IMG-449168 |
|
| | Remove the screw. Repeat on the other side. |
| | IMG-449170 |
|
| | |
| | IMG-369955 |
|
| | Note! The graphic shows the back of the component before removal. |
|
| | IMG-369539 |
|
| | |
| | IMG-449185 |
|
| | Note! The graphic shows the back of the component before removal. |
|
| | IMG-369594 |
|
| | Carefully pry loose the bottom edge of the panel and then continue around the panel. |
| | IMG-369774 |
|
| | |
| | IMG-373768 |
|
| | Disconnect the connector. |
| | IMG-370030 |
|
| | |
| | IMG-449202 |
|
| | Caution! Make sure that the motor is in the park position. |
Fold marked part aside. Remove the nut. |
| | IMG-449212 |
|
| | Remove the marked part. Use special tool: T9814088, Puller
|
| | IMG-449222 |
|
| | Disconnect the connector. Remove the screws. Remove the marked part. |
| | IMG-449235 |
|
| | Disconnect the connector. |
| | IMG-449237 |
|
| | Remove the nuts. Tightening torque: M6
, 10 Nm
|
| | IMG-449255 |
|
| | Note! The graphic shows the back of the component before removal. |
|
| | IMG-449265 |
|
| | Remove the marked part. Use hands only. |
| | IMG-360951 |
|
| | |
| | IMG-366366 |
|
| | |
| | IMG-449140 |
|
| | |
| | IMG-449147 |
|
| | Note! The graphic shows the back of the component before removal. |
|
| | IMG-449153 |
|
| | Remove the panel. Use hands only. |
| | IMG-449155 |
|
| | Note! The graphic shows the back of the component before removal. |
|
| | IMG-373747 |
|
| | |
| | IMG-373748 |
|
| | Disconnect the connector. |
| | IMG-369005 |
|
| | |
| | IMG-369090 |
|
| | |
| | IMG-449317 |
|
| | Remove the fasteners. Remove the insulation material. |
| | IMG-449326 |
|
| | Remove the nuts. Fold the insulation aside. |
| | |
| | IMG-449726 |
|
| | Use details according to image. |
| | IMG-449738 |
|
| | |
| | IMG-449740 |
|
| | Ensure that all clips engage. Install the nuts Tightening torque: M6
, 10 Nm
|
| | IMG-419675 |
|
| | Use: 988734, Cable tie, 750 mm
|
| | IMG-449755 |
|
| | Use detail according to image. |
| | IMG-449860 |
|
| | Tape the cables on the cable tie. |
| | IMG-449835 |
|
| | Caution! Take extra care not to crease the headliner. |
|
| | IMG-449876 |
|
| | Pull the wiring harness through. |
| | IMG-450092 |
|
| | Pull the wiring harness through. |
| | IMG-449996 |
|
| | Route the ground wire next to the existing wiring harness. Remove the screw. Connect the prerouted cable. Reinstall the screw. Use a cable tie Tightening torque: M6
, 10 Nm
|
| | IMG-450585 |
|
| | Use detail according to image. Release the connector's secondary lock. Lift approximately 2 mm. |
| | IMG-450111 |
|
| | |
| | IMG-451170 |
|
| | Connect the numbered terminal to the corresponding figure in the connector. Press until a click is heard. |
| | IMG-450591 |
|
| | |
| | IMG-450630 |
|
| | Connect the connector. Route the wire adjacent to existing wirings. Use a cable tie |
| | IMG-450631 |
|
| | Route the wire adjacent to existing wirings. Use a cable tie |
| | IMG-450661 |
|
| | Disconnect the connector. Fold marked part aside. |
| | IMG-450677 |
|
| | Position/route the cables as illustrated. Use a cable tie |
| | IMG-450761 |
|
| | Route the wire adjacent to existing wirings. Use a cable tie |
| | IMG-450760 |
|
| | Route the wire adjacent to existing wirings. Use a cable tie |
| | IMG-450779 |
|
| | Route the wire adjacent to existing wirings. Use a cable tie |
| | IMG-450810 |
|
| | Detach and fold back the floor covering. |
| | IMG-450815 |
|
| | Route the wire adjacent to existing wirings. Use a cable tie Fold the floor carpet back. |
| | IMG-450836 |
|
| | Route the wire adjacent to existing wirings. Use a cable tie |
| | IMG-450930 |
|
| | Position/route the cable as illustrated. |
| | IMG-450932 |
|
| | Route the wire adjacent to existing wirings. Use a cable tie |
| | IMG-450937 |
|
| | Connect the prerouted cable. |
| | IMG-450957 |
|
| | Route the wire adjacent to existing wirings. Use a cable tie |
| | |
| | IMG-449461 |
|
| | Release the catches. Remove the marked part. |
| | IMG-449518 |
|
| | |
| | IMG-449519 |
|
| | Release the catch. Release the lock. Remove the marked part.
|
| | IMG-374880 |
|
| | |
| | |
| | IMG-450980 |
|
| | Note the position. Connect the prerouted cable. |
| | IMG-450981 |
|
| | Install component that comes with the accessory kit. |
| | |
| | IMG-450986 |
|
| | Route the wire adjacent to existing wirings. Use a cable tie |
| | IMG-450993 |
|
| | Position/route the cable as illustrated. Use a cable tie |
| | IMG-450996 |
|
| | |
| | |
| | IMG-451001 |
|
| | Depress the locking devices. Release the connector's catch.
Disconnect the connector. |
| | IMG-451006 |
|
| | |
| | IMG-451016 |
|
| | |
| | IMG-451021 |
|
| | Note! The markings must be opposite each other. |
Adjust to the lowermost position. Remove the marked part. |
| | IMG-451030 |
|
| | Release the catches. Remove the marked part.
|
| | |
| | IMG-451065 |
|
| | Connect the numbered terminal to the corresponding figure in the connector. |
| | IMG-356971 |
|
| | Reinstall the removed parts in reverse order. |
| | IMG-242268 |
|
| | Download software (application) for the accessory's function according to the service information in VIDA. See VIDA or the accessories catalogue for software part number. |