Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
S80 2015
S80 (07-) 2015

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
313734681.131373081
Parking assistance, front




 

Materials

Designation

Part number

Electrical tape


Equipment
IMG-242205
A0000162

IMG-379943

IMG-378486


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Further information

2
 

These installation instructions show installation on left hand drive cars.

When installing on right-hand drive cars, perform the procedures on the opposite side and/or mirrored.

Where the procedure differs, the right-hand version is also shown with text and image.

 

Color symbols

3
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Removal

4
IMG-292826
 
5
IMG-354313
 

Remove the panel.

6
IMG-354315
 

Remove the weatherstrip.

7
IMG-354318
 

Caution!
The front and upper sill panel must be removed and installed as one unit.

8
IMG-354319
 

Detach the panel.

9
IMG-344930
 

Remove the panel.

10
IMG-354320
 

Remove the panel.

11
IMG-355521
 

Remove the screws.

Detach the panel.

12
IMG-355519
 

Disconnect the connector.

Remove the panel.

13
IMG-352187
 

Fold the carpet to the side.

14
IMG-353339
 

Locate the rubber grommet under the insulation and press it out.

15
IMG-249173
 
16
IMG-249174
 

Remove the panel.

17
IMG-307605
 

Remove the weatherstrips.

18
IMG-378526
 

Detach the panel.

19
IMG-378335
 
20
IMG-378954
 
21
IMG-249177
 
22
IMG-226722
 

Remove the panel.

23
IMG-255685
 

Remove the nuts.

Remove the clips.

Detach the panel.

Disconnect the connector.

Remove the panel.

24
IMG-307623
 

Turn the wheel inwards.

25
IMG-379381
 
 

Vehicles with headlamp washers

26
IMG-379384
 

Fold the wing liner to one side.

27
IMG-378537
 

Place a container under the car.

Take a piece of washer hose. Tie a knot in it and place it on the washer pump to prevent the washer fluid reservoir from emptying.

Release the lock.

Remove the hose.

 

All vehicles

28
IMG-307627
 

Turn the wheel inwards.

29
IMG-379382
 

Remove the screws.

30
IMG-379385
 

Fold the wing liner to one side.

31
IMG-379380
 

Disconnect the connector, if applicable.

32
IMG-379376
 

Release the connector's catch.

Disconnect the connector.

33
IMG-379377
 
34
IMG-353377
 

RHD: The procedure is carried out on the opposite side.

35
IMG-353378
 

RHD: The procedure is carried out on the opposite side.

36
IMG-353381
 

Disconnect the connector.

37
IMG-307689
 

Raise the car.

Remove the clips.

38
IMG-377609
 

Remove the clips.

Remove the screws.

39
IMG-379387
 

Remove the clips.

40
IMG-379394
 

Repeat on the other side.

41
IMG-379392
 

Caution!
Place the Bumper Cover on a suitable surface.

Request the aid of a colleague for this procedure.

Disconnect the connector for the fog lamp.

42
IMG-379406
 

Release the catches.

43
IMG-379412
 

The part is not to be reused.

 

Accessory installation

44
IMG-379413
 

Repeat on the other side.

45
IMG-379416
 

Repeat on the other side.

46
IMG-379418
 

Put the wiring in the Bumper cover without installing the wiring.

RHD: The cable harness is positioned mirrored.

47
IMG-379419
 
48
IMG-379420
 

Repeat on the other side.

49
IMG-379421
 

Repeat on the other side.

50
IMG-379422
 

Repeat on the other side.

51
IMG-379436
 

Repeat on the other side.

52
IMG-378325
 

Use: , Electrical tape

53
IMG-379484
 
 

Left hand drive vehicles

54
IMG-379467
 
55
IMG-379477
 
56
IMG-379479
 
57
IMG-273585
 
58
IMG-273586
 

Remove the nuts.

59
IMG-378517
 
60
IMG-378516
 

Pull the wiring through.

61
IMG-273588
 

Install the cable.

 

Right-hand drive vehicles

62
IMG-379480
 
63
IMG-307910
 
64
IMG-307911
 
65
IMG-273585
 
66
IMG-307912
 
67
IMG-307913
 
68
IMG-307914
 
 

All vehicles

69
IMG-345879
 

Note!
Orientation view


Note!
On some markets the rubber grommet may be covered by the heat shield.

70
IMG-377670
 
71
IMG-377675
 

Pull the wiring through.

72
IMG-340544
 

Insert the cable in to the passenger compartment, adjust the cable length out into the engine compartment and secure the rubber grommet.

 

Left hand drive vehicles

73
IMG-377671
 

Remove the tape.

Release the connector's secondary lock.

Connect the pre-routed cables to the 6-pin connector.

Depress the secondary lock.

 

Right-hand drive vehicles

74
IMG-377672
 

Remove the tape.

Release the connector's secondary lock.

Connect the pre-routed cables to the 6-pin connector.

Depress the secondary lock.

 

All vehicles

75
IMG-377673
 
76
IMG-249181
 
77
IMG-377674
 
 

Right-hand drive vehicles

78
IMG-358746
 

Fold the insulation to one side.

79
IMG-308083
 
 

All vehicles

80
IMG-379482
 

Route the cable harness to the existing cable harness.

81
IMG-249184
 

Route the cable harness to the existing cable harness.

Install the cable.

82
IMG-378500
 

Disconnect the connector, if applicable.

Attach the connector to the wiring harness.

Use: , Electrical tape

83
IMG-378501
 

Disconnect the connectors.

84
IMG-378503
 

The part is not to be reused.

85
IMG-378502
 

Install component that comes with the accessory kit.

86
IMG-378504
 

Connect the connectors.

87
IMG-378505
 

Connect the prerouted cable.

88
IMG-378508
 

Attach any excess wire to the wiring harness.

 

Installation

89
IMG-379403
 

Place the Bumper Cover in position for installation.

90
IMG-379492
 

Connect the connector.

91
IMG-379489
 
92
IMG-377070
 

Reinstall the removed parts in reverse order.

93
IMG-242268
 

Download software (application) for the accessory's function according to the service information in VIDA.

Order and download software according to: 30765568