2008 L.H.D

安装说明

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
XC90 2008
XC90 (03-) 2008

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
86855311.49472105
Level sensor for alarm




D3902151




Equipment
A0000162
A0801178


 
  

INTRODUCTION

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

  

Note!

This accessory requires software unique to the car.


1
R8503999
 

  • Fold the rear centre floor hatch up.

2
R8504000
 

  • Remove the left-hand side floor hatch (1).

3
R8902766
 

  • Remove the left-hand folding side panel.

4
R3903615
 

  • Disconnect the pre-routed green connector, taped on the cable harness under the fuse holder

  • Connect the connector to the tilt sensor

  • Install the tilt sensor on the fuse holder bracket. First hook the tilt sensor in the uppermost hole on the bracket. Then secure in the lower hole

  • Reinstall the side panel

  • Reinstall the side floor hatch and fold down the floor hatch.

5
 

  • Program the software according to the service information in VIDA.