Information

• Read through all of the instructions before starting installation.

• Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

• Ensure that all tools stated in the instructions are available before starting installation.

• Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

• In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

Color symbols

1. Used for focused component, the component with which you will do something.

2. Used as extra colors when you need to show or differentiate additional parts.

3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

4. Used when the component is not fully removed from the vehicle but only hung to the side.

5. Used for standard tools and special tools.

6. Used as background color for vehicle components.

7. Used for accessory components.

Removal

Remove the marked part.

Remove the screw.

Tightening torque: Cargo anchor, to body , 13 Nm

Repeat on the other side.

Lift the marked component up

Release the lock.

Loosen the marked detail.

Remove the marked part.

Remove the marked part.

Remove the screws.

Vehicles with keyless entry

Disconnect the connector.

All vehicles

Remove the marked part.

Remove the marked part.

Detach the panel.

Release the lock.

Use special tool: T9512943, L-hook

Disconnect the connector.

Remove the screws.

Remove the marked part.

Remove the panel.

Accessory installation

Disconnect the connector.

Install component that comes with the accessory kit.

Connect the connectors.

Route the wires adjacent to existing wirings.

Install the cable.

Use a cable tie

Connect the connectors.

Route the wire adjacent to existing wirings.

Install the cable.

Use a cable tie

Route the wire adjacent to existing wirings.

Install the cable.

Use a cable tie

Install components that come with the accessory kit.

Installation

Reinstall the removed part.

Reinstall the removed part.

Reinstall the screws.

Install the panel.

Transferring components

Remove the marked part.

Repeat on the other side.

Install the marked component.

Repeat on the other side.

Release the catches.

Remove the marked part.

Install the marked component.

Accessory installation

Install the marked component.

Make sure that the weather strip goes on top of the panel.

Use: Interior trim remover

Reinstall the screws.

Connect the connector.

Remove the protective film.

Remove any traces of glue.

Använd en blandning av 50% Volvo koncentrerad spolarvätska och 50% vatten.

Repeat on the other side.

Installation

Reinstall the removed parts in reverse order.