Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
V70 2016
V70 (08-) 2016

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
313734721.031373086
Parking assistance, rear




 

Special tools

 

999 5919 PULLER (SEAL-PINION,CAM-CRANKSHAFT)B200-6304

Tool number:999 5919

Tool description:PULLER (SEAL-PINION,CAM-CRANKSHAFT)B200-6304

Tool boards:46


Equipment
IMG-242205
IMG-345497

IMG-377076


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Color symbols

2
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Removal

3
IMG-332193
 

Set the ignition key to position 0.

4
IMG-377098
 

Note!
Orientation view

5
IMG-372212
 

Measure and mark as illustrated.

6
IMG-372210
 
7
IMG-372209
 


Use special tool: T9995919, PULLER (SEAL-PINION,CAM-CRANKSHAFT)B200-6304

8
IMG-372207
 
 

Accessory installation

9
IMG-372208
 
 

Removal

10
IMG-259683
 

Remove the screws.

11
IMG-259684
 

Remove the nuts.

12
IMG-259685
 

Remove the screws.

13
IMG-273303
 

Remove the screw.

14
IMG-377070
 

Repeat the steps when removing on opposite side.

15
IMG-273304
 

Caution!
Place the Bumper Cover on a suitable surface.

16
IMG-377115
 

The part is not to be reused.

 

Accessory installation

17
IMG-377116
 

Install component that comes with the accessory kit.

18
IMG-377078
 

Put the wiring in the Bumper cover without installing the wiring.

19
IMG-377077
 
20
IMG-377162
 
21
IMG-377080
 

Install the cable.

 

Removal

22
IMG-261414
 
23
IMG-273316
 
 

Accessory installation

24
IMG-273317
 
25
IMG-273318
 
26
IMG-273319
 

Locate the pre-routed connector.

27
IMG-273320
 

The part is not to be reused.

28
IMG-273321
 

Caution!
Make sure that the rubber grommet seals properly to the body.

Install component that comes with the accessory kit.

29
IMG-273322
 
30
IMG-273323
 

Connect the connectors.

31
IMG-273324
 
 

Installation

32
IMG-273330
 

Request the aid of a colleague for this procedure.

Place the Bumper Cover in position for installation.

Connect the connector.

33
IMG-273331
 
34
IMG-377070
 

Reinstall the removed parts in reverse order.

35
IMG-242268
 

Download software (application) for the accessory's function according to the service information in VIDA.

Order and download software according to: 30765571