2011 R.H.D

Parking assistance, front

Parking assistance, front
Find a Dealer

Op. No.: 36687 36630

Parking assistance, front is an excellent system that warns of obstructions when you have limited space in front of the car, e.g. with parallel parking.

The system is activated when the speed is less than 15 km/h (10 mph). A signal indicates distance to objects in front of the car. When an object is indicates, the radio's/stereo's sound level is muted and a pulsating "buzzer tone" comes from the car's front speakers.

The tone starts to sound when approx. 80 cm (30 in) remains to an obstacle and becomes a constant tone when the distance is approx. 30 cm (12 in) from the front bumper. To differentiate between front and rear systems, different frequencies are used for the tone and the sound comes from different speakers, front or back.

The kit consists of wiring and four sensors that are installed just about invisibly in the front bumper. The sensors are painted in the same colour as the car's bumper.

The switch below makes it easy to turn the system off, which can be useful as the system can sometimes generate "false" signals as a reaction to external sound sources with the same frequency as the system's sensors. Typical sources are horns, wet tyres on asphalt, air brakes and motorcycle exhaust pipes.

Part. No.
9487264Installation Instruction
+ Application1
Part. No.
30660684
+ Cleaning agent
Part. No.
9192678
+ Hole punching tool2
Part. No.
9814069
+ Parking assistance switch
Part. No.Description
30782183For cars with either BLIS or Start/StopInstallation Instruction
31269429For cars with both BLIS and Start/StopInstallation Instruction

Facts and advantages

  • Makes you aware of obstacles when parallel parking or the like

Technical data

Accessory weight:

0.7 kg (1.5 lbs)

Photo:

VCC_07308, VCC_17768, vccpartners

Note!

Front parking assistance can only be used in combination with rear parking assistance. Not in combination with auxiliary lights.

  1. Ordered according to separate procedures and downloaded using VIDA.
  2. The hole punching tool can be used for several installations. Replace the tool with a new one when it becomes blunt.
Last updated: 3/7/2024