Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
V40 2013
V40 (13-) 2013

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
322709041.232270864
Digital radio, DAB




 

Special tools

 

951 2620 Stripping tool (for wiring)

Tool number:951 2620

Tool description:Stripping tool (for wiring)

Tool boards:39

 

951 2785 Crimping tool (included in 9512669)

Tool number:951 2785

Tool description:Crimping tool (included in 9512669)

Tool boards:39

 

951 2777 Hot-air gun

Tool number:951 2777

Tool description:Hot-air gun

Tool boards:08



IMG-461885

IMG-461886


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Further information

2
IMG-400004
 

Caution!
Attach the antenna wires using tape. Cable ties or similar must not be used.


Caution!
Observe caution when handling fibre optic cables.


Caution!
Make sure that the fiber optic cables are not bent to a radius of less than 25 mm.

 

Color symbols

3
IMG-400010
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

  7. Used for accessory components.

 

Removal

4
IMG-361731
 

Remove the marked part.

5
IMG-368970
 

Remove the marked part.

6
IMG-370275
 

Remove the screw.

Remove the marked part.

7
IMG-368979
 

Detach the panel.

8
IMG-370274
 

Remove the marked part.

9
IMG-369020
 

Repeat on the other side.

 

Vehicles with heated rear seat

10
IMG-369022
 
11
IMG-369029
 

Disconnect the connector.

Repeat on the other side.

 

All vehicles

12
IMG-372960
 

Remove the marked part.

13
IMG-366386
 
14
IMG-366507
 
15
IMG-369055
 

Note!
The graphic shows the back of the component before removal.

16
IMG-369878
 

Remove the marked part.

17
IMG-369034
 

Note!
The graphic shows the back of the component before removal.

18
IMG-369033
 

Remove the marked part.

19
IMG-369048
 

Detach the panel.

20
IMG-369049
 

Detach the panel.

21
IMG-368833
 
22
IMG-449670
 
23
IMG-449672
 
24
IMG-360944
 

Repeat on the other side.

25
IMG-360951
 

Remove the marked part.

26
IMG-354954
 

Remove the screws.

27
IMG-449160
 

Note!
The graphic shows the back of the component before removal.

28
IMG-369939
 

Remove the panel.

29
IMG-449163
 

Note!
The graphic shows the back of the component before removal.

30
IMG-369944
 

Remove the panel.

31
IMG-366366
 

Remove the marked part.

32
IMG-355946
 

Remove the screws.

33
IMG-449147
 
34
IMG-449153
 

Remove the marked part.

35
IMG-373747
 

Detach the panel.

36
IMG-373748
 

Disconnect the connector.

37
IMG-369934
 

Note!
The graphic shows the back of the component before removal.

38
IMG-369005
 

Remove the marked part.

39
IMG-369090
 

Remove the marked part.

40
IMG-461419
 
41
IMG-461420
 

Remove the marked detail/details.

42
IMG-461421
 

Remove the screws.


Tightening torque: Front seat to body , 40 Nm

43
IMG-461440
 
44
IMG-461444
 

Remove the marked detail/details.

45
IMG-461449
 

Remove the screws.


Tightening torque: Front seat to body , 40 Nm

46
IMG-400002
 

Remove the battery's negative cable.

47
IMG-373198
 

Note!
Orientation view

48
IMG-329209
 

Loosen the screws.

Disconnect the connector.

49
IMG-382639
 

Disconnect the connector, if applicable.

50
IMG-461416
 

Caution!
Be extra careful when removing or installing this component.

51
IMG-461530
 

Remove the screws.

Loosen the marked detail.

 

Vehicles with High Performance Sound

52
IMG-461942
 

Disconnect the connector.

 

Vehicles with Premium Sound

53
IMG-461922
 

Disconnect the connector.

54
IMG-460609
 

Note!
Orientation view

 

Accessory installation

55
IMG-460610
 

Loosen the tape temporarily.

The item is to be reused.

56
IMG-460611
 
57
IMG-460426
 


Use special tool: T9512620, Stripping tool (for wiring)

58
IMG-460764
 

Use detail according to image.

59
IMG-460428
 


Use special tool: T9512620, Stripping tool (for wiring)

60
IMG-460373
 
61
IMG-460547
 


Use special tool: T9512785, Crimping tool (included in 9512669)

62
IMG-460375
 

Caution!
Make sure that the surrounding components are protected from heat.


Use special tool: T9512777, Hot-air gun

63
IMG-460376
 
64
IMG-460660
 
65
IMG-460520
 

Connect the connectors.

66
IMG-461533
 

Fold the carpet aside.

67
IMG-461553
 

Route the cable harness to the existing cable harness.

Install the wiring harness.

Use a cable tie

68
IMG-461535
 

Remove the screw.

69
IMG-461560
 

Connect the ground cable.

Reinstall the screw.


Tightening torque: M6 , 10 Nm

70
IMG-461592
 

Route the cable harness to the existing cable harness.

Install the wiring harness.

Use a cable tie

71
IMG-461597
 

Fold the floor carpet back.

72
IMG-461598
 

Caution!
Make sure that the fiber optic cables are not bent to a radius of less than 25 mm.

Place the overlap of the cable mat under the amplifier.

Reinstall the removed part.

Reinstall the screws.


Tightening torque: M6 , 10 Nm

73
IMG-461604
 

Route the wire adjacent to existing wirings.

Install the cable.

Use a cable tie

74
IMG-461609
 

Loosen the marked detail.

75
IMG-461612
 

Route the wire adjacent to existing wirings.

Install the cable.

Use a cable tie

76
IMG-461633
 

Route the wire adjacent to existing wirings.

Install the cable.

Use a cable tie

77
IMG-461635
 

Assemble components that come with the accessory kit.

78
IMG-461675
 

Note!
Note the position.

Install the marked component.

79
IMG-461664
 

Install components that come with the accessory kit.

80
IMG-461683
 

Connect the connectors.

81
IMG-461779
 

Use details according to image.

82
IMG-461781
 

Assemble components that come with the accessory kit.

Note the position.

83
IMG-461785
 

Connect the connector.

84
IMG-461794
 

Route the wire adjacent to existing wirings.

Install the cable.

Use tape

85
IMG-449835
 
86
IMG-461796
 

Use tape

87
IMG-449876
 

Pull the wiring through.

88
IMG-461881
 

Pull the wiring through.

89
IMG-461830
 

Disconnect the connectors.

90
IMG-461833
 

Remove the screw.

91
IMG-461834
 

Note!
The graphic shows the back of the component before removal.

92
IMG-461835
 

Remove the marked part.

The part is not to be reused.

93
IMG-461877
 

Install component that comes with the accessory kit.

Install the screw.


Tightening torque: M6 , 10 Nm

94
IMG-461879
 

Connect the connectors.

95
IMG-461807
 

Assemble components that come with the accessory kit.

Depress the secondary lock.

96
IMG-461880
 

Connect the connector.

97
 

Reinstall the removed parts in reverse order.

98
IMG-400003
 

Reinstall the battery's negative cable.


Tightening torque: Battery cable for battery , 6 Nm

99
IMG-400006
 

Order and download software according to VIDA/SOFTWARE.

Order and download software according to: 31382168

Download software (application) for the accessory's function according to the service information in VIDA.

Order and download software according to: 31330938