Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
XC90 2016
XC90 (16-) 2016

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
316642171.031664527, 31664536
Luggage compartment sill moulding




 

Special tools

 

999 5919 PULLER (SEAL-PINION,CAM-CRANKSHAFT)B200-6304

Tool number:999 5919

Tool description:PULLER (SEAL-PINION,CAM-CRANKSHAFT)B200-6304

Tool boards:46


Equipment
A0000162

IMG-441420


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Color symbols

2
IMG-440436
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

  7. Used for accessory components.

 

Removal

3
IMG-422192
 
4
IMG-422193
 

Remove the panel.

5
IMG-422213
 

Remove the screw.

6
IMG-394779
 
7
IMG-383039
 

Remove the marked part.

8
IMG-441425
 

Remove the marked part.

Remove the screw.


Tightening torque: Panel, to D-Pillar , 4.5 Nm

9
IMG-441426
 

Remove the panel.

10
IMG-441430
 

Remove the nut.

11
IMG-441427
 

Remove the panel.

12
IMG-383040
 

Remove the marked part.

13
IMG-394727
 

Remove the marked part.

14
IMG-383047
 

Note!
Do not loosen the bolts more than 2 turns.

15
IMG-383048
 

Note!
The clips consist of two parts.

16
IMG-393950
 

Remove the clips.


Use special tool: T9995919, PULLER (SEAL-PINION,CAM-CRANKSHAFT)B200-6304

17
IMG-387004
 

Remove the marked part.

18
IMG-422211
 

Remove the screws.


Tightening torque: Cargo anchor, to body , 13 Nm

19
IMG-422220
 

Remove the panel.

Disconnect the connector.

20
IMG-441450
 

Disconnect the connector.

 

Accessory installation

21
IMG-441451
 

Connect the connectors.

22
IMG-441453
 

Attach the connector to the wiring harness.

23
IMG-441495
 

Connect the connector.

24
IMG-441497
 

Route the wire adjacent to existing wirings.

Install the cable.

Use a cable tie

25
IMG-441498
 

Route the wire adjacent to existing wirings.

Install the cable.

Use a cable tie

26
IMG-441500
 

Route the wire adjacent to existing wirings.

Install the cable.

Use a cable tie

27
IMG-441511
 

Connect the connector.

Reinstall the removed part.

28
IMG-441505
 

Install component that comes with the accessory kit.

Connect the connector.

29
IMG-444438
 

Install the marked component.

Make sure that the weather strip goes on top of the panel.

Use: Interior trim remover

30
IMG-444442
 

Tighten the bolts.

31
IMG-441507
 

Position the cable harness excess as illustrated.

Install the cable.

Use a cable tie

32
IMG-441508
 

Remove the protective film.

33
IMG-442411
 

Remove any traces of glue.

Använd en blandning av 50% Volvo koncentrerad spolarvätska och 50% vatten.

Repeat on the other side.

 

Installation

34
 

Reinstall the removed parts in reverse order.