Information

• Read through all of the instructions before starting installation.

• Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

• Ensure that all tools stated in the instructions are available before starting installation.

• Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

• In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

Color symbols

1. Used for focused component, the component with which you will do something.

2. Used as background color for vehicle components.

3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

4. Used when the component is not fully removed from the vehicle but only hung to the side.

5. Used for standard tools and special tools.

6. Used as background color for vehicle components.

Removal

Release the locks.

Disconnect the connectors.

Disconnect the connector, if applicable.

Remove the glass from the mirror.

Use special tool: T9997390, Key

Release the locks.

Use: Electrician's screwdriver

Remove the marked part.

Disconnect the connector.

Remove the screws.

Tightening torque: Rear view mirror to front door , 8 Nm

Remove the marked part.

The part is not to be reused.

Accessory installation

Install component that comes with the accessory kit.

Installation

Reinstall the removed parts in reverse order.

Repeat all method steps for the other side.

Order and download software according to: 31428015