Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
XC70 2015
XC70 (08-) 2015 B4204T11 Nordic

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
314143381.031408281
Battery Charger




IMG-290823




 

Special tools

 

951 2782 Rivet nut tool

Tool number:951 2782

Tool description:Rivet nut tool

Tool boards:08


Materials

Designation

Part number

Electrical tape

Isopropanol

1161721


Equipment
IMG-345497

IMG-381738

IMG-381739

IMG-381750


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Conditions

2
 

There may be parts in the accessories kit that are not needed for this installation.

 

Color symbols

3
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Removal

4
IMG-332179
 
  1. Set the ignition key to position 0.

  2. Remove the battery's negative cable.

5
IMG-376071
 


Tightening torque: Wheel to wheel hub
Stage 1: 20 Nm
Stage 2: 140 Nm

6
IMG-381284
 

Remove the screws.

7
IMG-381285
 

Remove the screws.

8
IMG-376187
 

Remove the nuts.

9
IMG-374255
 
10
IMG-374576
 

Remove the tape.

 

Accessory installation

11
IMG-374853
 


Use special tool: T9512782, Rivet nut tool

 

Removal

12
IMG-265069
 

Remove the screws.

13
IMG-265070
 

Remove the screws.

14
IMG-265071
 

Disconnect the connector, if applicable.

15
IMG-265072
 

Caution!
Cut carefully to avoid unintentional damage or personal injury.


Note!
Use a sharp knife.

Adjust the hole with a file or knife as necessary.

16
IMG-375838
 

Deburr edges

 

Accessory installation

17
IMG-381751
 
18
IMG-231564
 

Pull the wiring through.

19
IMG-381752
 
20
IMG-374227
 
21
IMG-376105
 
22
IMG-374378
 

Note!
Orientation view

23
IMG-231571
 
24
IMG-381736
 

Install the screw.

25
IMG-376106
 

Note!
Orientation view

26
IMG-376107
 
27
IMG-374440
 
28
IMG-374446
 
29
IMG-374451
 

Install the clip(s).

30
IMG-374470
 
31
IMG-374472
 
32
IMG-374474
 

Install the clip(s).

 

Vehicles with Alarm siren

 

Removal

33
IMG-374826
 

Note!
Orientation view

34
IMG-374832
 

Disconnect the connector.

35
IMG-374828
 

Remove the screws.

 

All vehicles

 

Accessory installation

36
IMG-374553
 
37
IMG-374568
 
38
IMG-374562
 

Install the screws.

39
IMG-375848
 

Install the clip(s).

40
IMG-374835
 
41
IMG-374570
 

Install the catch.

42
IMG-374571
 

Install the cables.

 

Vehicles with Alarm siren

43
IMG-374843
 
44
IMG-375218
 
45
IMG-374862
 

Install the screw.

46
IMG-374856
 

Install the screws.

47
IMG-374860
 

Connect the connector.

 

Vehicles without Alarm siren

48
IMG-375885
 
49
IMG-375218
 
50
IMG-374862
 

Install the screw.

51
IMG-375886
 

Install the screws.

Install the nuts

 

All vehicles

52
IMG-374863
 
53
IMG-374882
 
54
IMG-381741
 

Install the clip(s).

55
IMG-374963
 
56
IMG-374526
 
57
IMG-375030
 

Note!
Orientation view

58
IMG-376114
 
59
IMG-376133
 

Pull the wiring through.

Use tape

60
IMG-375035
 
61
IMG-376135
 

Install the clip(s).

 

Removal

62
IMG-376121
 

Remove the rubber strip.

63
IMG-381243
 

Remove the cable harness clips.

64
IMG-381261
 

Remove the cable harness clips.

65
IMG-376160
 

Disconnect the connector.

66
IMG-376158
 

Loosen the hose clamp.

67
IMG-376159
 
68
IMG-375085
 
69
IMG-375093
 
70
IMG-375099
 
71
IMG-375100
 
72
IMG-381321
 

Remove the screw.

73
IMG-376162
 
 

Accessory installation

74
IMG-375102
 
75
IMG-376169
 
76
IMG-376168
 
 

Installation

77
IMG-381321
 

Reinstall the screw.

 

Accessory installation

78
IMG-376164
 
79
IMG-376163
 

Install the clip(s).

80
IMG-375110
 

Install the screw.


Tightening torque: M6 , 10 Nm

 

Removal

81
IMG-375129
 
82
IMG-375131
 
83
IMG-375143
 
84
IMG-375146
 

Caution!
Cut carefully to avoid unintentional damage or personal injury.

 

Accessory installation

85
IMG-375150
 
86
IMG-375151
 

Pull the wiring through.

87
IMG-376501
 

Use: , Electrical tape

Wrap tape around the cable to increase the diameter.

Increase the diameter to 6.5 mm.

88
IMG-375153
 

Remove the nut.

89
IMG-375161
 


Tightening torque: M6 , 10 Nm

Install the nut.

90
IMG-376433
 
91
IMG-376438
 
92
IMG-376507
 

Clean the surface.

Use: 1161721, Isopropanol

93
IMG-376511
 

Use: , Electrical tape

94
IMG-376442
 
 

Installation

95
IMG-375167
 
96
IMG-375093
 
97
IMG-375168
 
98
IMG-375169
 
99
IMG-381243
 
100
IMG-381261
 
101
IMG-376165
 
102
IMG-376158
 
103
IMG-376171
 
104
IMG-375172
 
 

Accessory installation

105
IMG-381188
 
106
IMG-377070
 

Reinstall the removed parts in reverse order.