{{EPRELURL}} L.H.D

Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
S60 Cross Country {{eprelUrl}}
S60 Cross Country 2016, S60 Cross Country 2017, S60 Cross Country 2018

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
314086651.039834476, 39825250, 39841562, 39825249, 39825248, 39825247, 39825237, 39825238, 39825233, 39829613
Multimedia system, RSE, two screens, with two players




Materials

Designation

Part number

Cable tie, 750 mm

988734

Electrical tape


Equipment
IMG-345497
IMG-239664

IMG-382160

IMG-382285


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Color symbols

2
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Removal

3
IMG-332194
 

Set the ignition key to position I.

4
IMG-292804
 

Remove the panel.

5
IMG-292806
 

Fold the carpet aside.

6
IMG-292823
 

  1. Unhook the cable harness clips.

  2. Disconnect the connector.

7
IMG-292826
 

Remove the panel.

 

Vehicles with the 4C system.

8
IMG-292827
 

Disconnect the connector.

 

All vehicles

9
IMG-346236
 

Remove the panel.

10
IMG-340984
 

Disconnect the connector.

11
IMG-340985
 

Remove the screws.

12
IMG-355818
 

Remove the screws.

 

Cars with automatic transmissions

13
IMG-293006
 
14
IMG-293007
 

Release the shift-lock function.

 

All vehicles

15
IMG-340981
 

Remove the panel.

 

Cars with manual transmissions

16
IMG-345292
 
 

All vehicles

17
IMG-293021
 
18
IMG-293022
 
19
IMG-293023
 

Remove the screws.

20
IMG-377998
 

Remove the screws.

21
IMG-372558
 

Adjust to the lowermost position.

Repeat on the other side.

22
IMG-372559
 

Adjust the seat to center position so that the seat fastening bolts can be removed.

Repeat on the other side.

23
IMG-332179
 

  1. Set the ignition key to position 0.

  2. Remove the battery's negative cable.

24
IMG-329148
 
25
IMG-340979
 
26
IMG-340980
 

Remove the screws.


Tightening torque: ,

27
IMG-303005
 
28
IMG-303006
 

Remove the screws.


Tightening torque: ,

 

Alternative 1

29
IMG-380657
 
 

Alternative 2

30
IMG-380655
 
31
IMG-380656
 
 

All vehicles

32
IMG-329151
 
33
IMG-373198
 

Note!
Orientation view

34
IMG-329209
 

Loosen the screws.

Disconnect the connector.

35
IMG-382639
 

Disconnect the connector, if applicable.

36
IMG-329153
 

Caution!
Be extra careful when removing or installing this component.

37
IMG-377070
 

Repeat the steps when removing on opposite side.

 

Accessory installation

38
IMG-382637
 

Use: 988734, Cable tie, 750 mm

39
IMG-382638
 

Use: 988734, Cable tie, 750 mm

40
IMG-372824
 

Use: , Electrical tape

41
IMG-373154
 

Thread the cable tie from the head restraint's inner mounting.

Route the cable tie inside the backrest between the upholstery's thin foam and the impact protection.

42
IMG-380827
 

Place the component where indicated in the graphic.

43
IMG-379508
 

Note!
Orientation view

44
IMG-379510
 
45
IMG-379514
 

Use: , Electrical tape

46
IMG-379516
 

Pull the wiring through.

Remove the tape.

47
IMG-380828
 

Place the component where indicated in the graphic.

The cables must be positioned in front of the head restraint's tube.

48
IMG-380829
 

Pull the wiring through.

49
IMG-380830
 

Caution!
Check that the component has locked in its bottom position.

50
IMG-262956
 

The image shows seat without upholstery.

Using your fingers, push the cable harness under the protective pad. After installation, the cable harness must not appear under the upholstery.

  1. padding

  2. Protective pad

51
IMG-373320
 

Caution!
Make sure that no part of the wiring harness is trapped.

The image shows seat without upholstery.

Route the cable harness to the existing cable harness.

Install the cable.

52
IMG-373201
 

Note!
Orientation view

53
IMG-373200
 

Note!
The graphic shows the back of the component before removal.

54
IMG-373202
 

Remove the screw.

55
IMG-373206
 
56
IMG-380695
 

Note!
Extra cable length must be secured using cable ties.

Install the cable.

57
IMG-377070
 

Repeat the steps when installing accessories on opposite side.

 

Removal

58
IMG-293024
 
 

Vehicles with headset sockets

59
IMG-293025
 
60
IMG-293026
 

Disconnect the connector.

 

All vehicles

61
IMG-293021
 
62
IMG-329163
 
63
IMG-293028
 
64
IMG-293029
 
65
IMG-329164
 

Remove the screws.

66
IMG-344819
 

Disconnect the connector.

 

Accessory installation

67
IMG-344825
 

Install component that comes with the accessory kit.

Connect the connector.

68
IMG-344827
 

Connect the connector.

69
IMG-344828
 

Install the part with butyl tape.

70
IMG-329435
 

Pull the wiring through.

71
IMG-329164
 

Caution!
Make sure that no part of the wiring harness is trapped.

Reinstall the removed part.

72
IMG-345746
 

Remove the panel.

73
IMG-374497
 
74
IMG-374495
 

Locate the connector.

Disconnect the connector.

75
IMG-379240
 

Install component that comes with the accessory kit.

Connect the connector.

76
IMG-362040
 

Connect the connector.

77
IMG-382650
 
78
IMG-379247
 

Install component that comes with the accessory kit.

79
IMG-379250
 

Connect the connector.

80
IMG-379345
 

Install the cables.

81
IMG-379274
 
82
IMG-379278
 

Pull the wiring through.

83
IMG-379291
 

Connect the connectors.

84
IMG-379293
 
85
IMG-379365
 

Fold the carpet aside.

86
IMG-379367
 
87
IMG-379368
 

Fold the floor carpet back.

88
IMG-379369
 
89
IMG-379485
 
 

Installation

90
IMG-329473
 

Caution!
Be extra careful when removing or installing this component.

Reinstall the front seat.

91
IMG-382653
 
92
IMG-372884
 

Note!
Orientation view

93
IMG-380703
 

Connect the cable harness.

94
IMG-380704
 
95
IMG-329270
 

Connect the connector.

Tighten the screw.

96
IMG-382654
 

Connect the connector.

97
 

Repeat the steps when installing on opposite side.

98
 

Reinstall the removed parts in reverse order.

99
IMG-336901
 

Reinstall the battery's negative cable.

100
IMG-336904
 

Warning!
When switching the ignition on for the first time after a battery disconnect and connect, make sure to stand outside the vehicle and only reach into the vehicle keeping clear of the air bag deployment areas.

Set the ignition key to position II.

101
IMG-382943
 

Set the clock.

102
 

Place the manual for this accessory in a suitable location in the car.

103
IMG-382312
 
104
IMG-382311
 
105
IMG-275777
 

Adapt the DVD player to the vehicle according to: Product specifications/Design and Function/3 Electrical system/39 Media - communication and entertainment/393 Equipment for entertainment/System for rear seat entertainment/Design

© Volvo Car CorporationMultimedia system, RSE, two screens, with two players- 31408665 - V1.0
volvocars.com
Lifestyle Collection
Svenska
Find a Dealer
Sweden

Cookies Legal Disclaimer Privacy Policy Copyright

Copyright © 2025 Volvo Cars. All rights reserved.