Information

• Read through all of the instructions before starting installation.

• Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

• Ensure that all tools stated in the instructions are available before starting installation.

• Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

• In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

Color symbols

1. Used for focused component, the component with which you will do something.

2. Used as extra colors when you need to show or differentiate additional parts.

3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

4. Used when the component is not fully removed from the vehicle but only hung to the side.

5. Used for standard tools and special tools.

6. Used as background color for vehicle components.

Preparation

Set the ignition key to position 0.

Removal

Remove the part carefully

Remove the screws.

Remove the panel.

Disconnect the connector.

Remove the screws.

Disconnect the connector.

Remove the panel.

Release the catches.

Repeat on the other side.

Use: Electrician's screwdriver

Detach the panel.

Disconnect the connectors.

Remove the panel.

Disconnect the connectors.

Depress the locking device.

Release the gearshift cable.

Release the lock.

Release the gearshift cable.

Remove the screws.

Repeat on the other side.

Accessory installation

Install component that comes with the accessory kit.

Pull the wiring through.

Pull the wiring through.

Pull the wiring through.

A click confirms that the component is in the correct position.

A click confirms that the component is in the correct position.

Install component that comes with the accessory kit.

Pull the wiring through.

Release the lock.

Lift approximately 2 mm.

Use: Electrician's screwdriver

Note the position.

Connect the cable harness.

Depress the locking device.

Installation

Reinstall the removed parts in reverse order.

Download software (application) for the accessory's function according to the service information in VIDA. See VIDA or the accessories catalogue for software part number.