Information

• Read through all of the instructions before starting installation.

• Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

• Ensure that all tools stated in the instructions are available before starting installation.

• Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

• In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

Color symbols

1. Used for focused component, the component with which you will do something.

2. Used as extra colors when you need to show or differentiate additional parts.

3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

4. Used when the component is not fully removed from the vehicle but only hung to the side.

5. Used for standard tools and special tools.

6. Used as background color for vehicle components.

Removal

Set the ignition key to position 0.

Remove the panel.

Remove the panel.

Release the lock.

Remove the panel.

Remove the screws.

Remove the panel.

Disconnect the connectors.

Remove the screws.

Disconnect the connector.

Remove the cable tie(s).

Disconnect the connector.

Remove the screw.

Remove the panel.

Pull the wiring through.

Accessory installation

Use tape

Use: 1161656, Melting adhesive

Use special tool: T9512932, Tension spring

Pull the wiring through.

Installation

Install the panel.

Install the screw.

Accessory installation

Connect the connectors.

Tear off the excess foam tape.

Clamp the cables and connectors to the existing cables to prevent noise.

Reinstall the removed parts in reverse order.