Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
V40 Cross Country 2013

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
313303911.039818296, 39818277, 39818279, 39818280, 39818281, 39818285, 39818286, 39818287, 39818288, 39818292, 39818293, 39818294, 39822049, 39818295, 31330390
Bumper cover




IMG-354411




 

Materials

Designation

Part number

Isopropanol

1161721


Equipment
IMG-345497
IMG-244945
IMG-239660

IMG-354412


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Conditions

2
 

When installing, the car must retain a temperature of 20 degrees C.

After installation, the car must not be washed for 48 hours

After installation, the car must not be driven for 2 hours

 

Color symbols

3
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Accessory installation

4
IMG-354413
 
5
IMG-354414
 

Clean the surface.

Allow to dry.

6
IMG-354449
 

Use suitable tape to indicate the center.

7
IMG-354415
 

Use suitable tape to indicate the center.

8
IMG-372653
 

Note!
Orientation view

9
IMG-372654
 

Note!
Note the position.

10
IMG-354416
 

Adjust the position of the Bumper Protection using the tape marks.

11
IMG-354417
 

Note!
Make sure that the Bumper Protection is installed on the flat bumper surface only, not covering any sharp radius.

12
IMG-354420
 

Note!
Use tape to temporarily fix the bumper cover in the correct position.

13
IMG-354423
 

Drill the holes.

Remove the swarf.

14
IMG-354422
 
15
IMG-354424
 

Clean the Bumper Cover surface.

Allow to dry.

Use: 1161721, Isopropanol

16
IMG-354607
 

Adjust the position of the Bumper Protection using the tape marks.

Center the holes against each other.

17
IMG-354436
 
18
IMG-354431
 

Remove the protective film.

Thoroughly press, by hand, all over the Bumper Protection to make it cling properly.

19
IMG-354434
 

Remove the protective film.

Thoroughly press, by hand, all over the Bumper Protection to make it cling properly.

20
IMG-372661
 

Clean the surface.

Allow to dry.

Use: 1161721, Isopropanol

21
IMG-354437
 
22
IMG-354438
 

Remove the protective film.

23
IMG-354439
 

Note!
Orientation view

24
IMG-371798
 

Note!
Keep the part stretched during installation.

25
IMG-371810
 

Note!
Keep the part stretched during installation.

26
IMG-354440
 

Thoroughly press, by hand, all over the Bumper Protection to make it cling properly.