Load carrier, wing profile for rails

Load carrier, wing profile for rails

Op. No.: 89141

A high quality load carrier for safe and secure transport of loads on the roof.

The aerodynamically shaped wing profile has been optimised to give minimal wind resistance and wind noise, which makes the car journey more comfortable.

The load carrier makes it quick and easy to install Volvo's roof boxes, bicycle holder and holders for sports equipment.

Together with the integrated torque wrench it can be easily adjusted for correct fastening, which gives increased safety and security.

It is easy to install and remove.

Part. No.

Facts and advantages

  • Attractive Volvo design.

  • Aerodynamic wing profile with T-track.

  • Ergonomic adjustment with integrated torque wrench and lock.

  • Can be fitted on cars with roof rails.

  • All Volvo's loading accessories are suitable. However, some loading accessories require T-track adaptation.

  • Volvo marked.

  • Lock included (includes four keys).

  • Lock kit can be installed and allows use of the same key for the load carrier and roof load accessory.

  • "City Crash" tested.1

Technical data


Aluminum with protective housing in hard wearing plastic


Black with aluminium profile

Accessory weight:

6.0 kg (13 lbs)

Load width:

1040 mm

Maximum roof load:

100 kg (220 lbs)




Not suitable for vehicles without roof rails.


With integrated rails, the height of the car will be 1840 mm, and with high rails it will be 1872 mm.

  1. City Crash test according to ISO 11154-5 / DIN 75302: 2006-05 simulates a collision in a city environment at 30 km/h with a maximum 100 kg roof load.
Last updated: 12/17/2020