Mat, luggage compartment, textile, reversible
A practical waterproof and reversible mat with textile on one side and rubber on the other for transporting dirty loads.
Mat, luggage compartment, molded plastic
A practical luggage compartment mat in moulded plastic for everyone with an active outdoor life. Thanks to the raised edges dirt and water are prevented from leaking out into the luggage compartment.
Protective net, nylon
A practical square pattern protective net in strong nylon together with two strong steel rods, one in the top edge and one in the lower edge. The net prevents luggage and loads from being thrown forward into the passenger compartment in case of of heavy braking.
Protective grille, steel
A practical protective grille that prevents loads or pets from being thrown forward into the passenger compartment in the event of heavy braking or a collision.
Load compartment divider, longitudinal
A steel load compartment divider enables you to separate the load compartment longitudinally, and then have two load compartments in one. You can for example separate dirty or fragile cargo from other cargo.
Luggage compartment cover
A stylish, retractable load compartment cover that conceals luggage in the load compartment.
Load lashing strap
The load in the luggage compartment can be held securely in place using this practical and user-friendly load lashing strap.
Net, luggage compartment, floor (Excl. CN)
A practical fabric net that prevents loads from moving about the luggage compartment. Manufactured in elastic material making it easy to stow luggage underneath it. Colour coordinated with the interior.
The Volvo towbar program
The Volvo towbar has a unique design for the S80, S60 and V70 00- and is in harmony with the lines of the car.
Towbar, fixed (Excl. AU)
With a unique design for S80, V70, V70 R and XC70 , this tow hitch is a must for anyone who values safety and promised performance. The cars are fully prepared with weld nuts in the body and a clear cutout marking in the bumper shell.
Towbar, detachable (Excl. AU)
A towbar with a unique design for V70 and V70 R, easy to install when it's needed. When it's not needed, it's easily removed and all that can be seen is the fully covering protective plug. The car is fully prepared with weld nuts in the body and a clear marking for cut-out in the bumper casing.
The protective cover has been designed to hide the mounting of the removable towball, enabling the car to maintain its elegant appearance when the towbar is not in use. All that is visible is the protective cover on the bumper.
A specially designed cable harness kit for S80, S60, S60 R, V70, V70 R and XC70.
Adapter for towbar wiring
For temporary adaptation of the car's towbar wiring to suit another pin connection on the trailer.
A specially designed transportation system for loads on the roof. The load carriers consist of two heavy-duty, galvanized, plastic-coated steel profiles and feet with fully covering plastic casings.
Rails, designed to suit the car's roof line. Aerodynamic design with elegant attachment to the roof molding and very easy to fit thanks to the three pre-installed fixing points in the roof.
Load carrier, for rails
Elegantly designed load carriers for fitting on rails that suit the car even without a load. With a neatly designed load carrier foot with an integrated and concealed attachment mechanism.
Load carrier, wing profile for rails
Elegantly designed load carriers with wing profile that suit the car even without a load. An aluminum choice of material that gives the car an exclusive and sporty image.
A lock system that makes it easier if you have load carriers and wish to add other accessories. You only need one key for up to four locks to fit the entire range of available load carriers.
Bicycle holder, load compartment
The accessory for anyone who wants to take extra care of their bicycles. This holder can be used to transport two bicycles inside the car, well protected from the weather, wind and tampering individuals.
Bicycle holder, aluminum
A bicycle holder for anyone who appreciates a combination of elegant design and simple handling. Made of aluminum and structured around a solid rail and robust rod.
The perfect steel bicycle holder. It is simple to use, practical and great value for your money.
Bicycle holder + wheel holder for fork mounting
A bicycle holder with new, smart, and elegant design. Made of aluminum, which fits all front forks including bicycles with disc brakes.
Sport Equipment Holder
Ski holder with sliding rail
A ski holder for anyone who wants the very best. There's no need to climb on the car and get dirty when loading and unloading. With a simple pull, the ski holder slides out to the side of the car, providing easier access to your skis.
Ski holder, aluminum
Volvo's aerodynamic aluminum ski holder for all types of skis and snowboards. Thanks to the ski holder's practical push-button opening, loading and unloading is easy, even with thick ski gloves.
Volvo's lockable ski holder with good-looking design and smooth shapes makes the ski trip a comfortable pleasure. Thanks to the ski holder's practical push-button opening, loading and unloading is easy, even with thick ski gloves.