Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
V60 Cross Country 2020
V60 Cross Country (19-) 2020

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
314706141.132204014, 32204780, 32204779
Steering wheel leather heated




 

Special tools

 

999 5919 PULLER (SEAL-PINION,CAM-CRANKSHAFT)B200-6304

Tool number:999 5919

Tool description:PULLER (SEAL-PINION,CAM-CRANKSHAFT)B200-6304

Tool boards:46

 

981 4089 Anti-static strap

Tool number:981 4089

Tool description:Anti-static strap

Tool boards:39

 

981 4199 Torque wrench

Tool number:981 4199

Tool description:Torque wrench

Tool boards:08


Equipment
IMG-345497
IMG-239664

IMG-433181


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Color symbols

2
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Removal

3
IMG-426132
 

Turn on the ignition.

4
IMG-400002
 

Remove the battery's negative cable.

5
IMG-395203
 
6
IMG-433590
 

Release the lock.

Use: Electrician's screwdriver

Use: Interior trim remover

7
IMG-395232
 
8
IMG-433586
 

Release the lock.

Use: Electrician's screwdriver

Use: Interior trim remover

Turn the steering wheel into neutral position.

9
IMG-433236
 
10
IMG-433646
 
11
IMG-433670
 

Release the catch.

12
IMG-433673
 

Release the locks.

13
IMG-395260
 

Remove the panel.

14
IMG-433450
 

Remove the screws.

Remove the marked part.

15
IMG-395203
 
16
IMG-433205
 
17
IMG-433212
 
18
IMG-433220
 

Release the lock.

19
IMG-395232
 
20
IMG-433221
 
21
IMG-433222
 

Release the lock.

Turn the steering wheel into neutral position.

22
IMG-433452
 

Loosen the marked detail/details.

23
IMG-433490
 

Warning!
When temporarily storing a pyrotechnical component, it must always be positioned with its active part (e.g. air bag front or equivalent) facing up.

Release the connector's catch.

Use: Electrician's screwdriver

Disconnect the connector.

24
IMG-395470
 

Disconnect the connector.

25
IMG-433226
 

Remove the screw.

Remove the marked part.

26
IMG-433271
 

Remove the screws.

27
IMG-433240
 

Note!
The graphic shows the back of the component before removal.

Disconnect the connectors.

Remove the cable harness clips.

28
IMG-433426
 
  1. Tilt the component somewhat.

  2. Release the catch.

  3. Remove the marked part.


Use special tool: T9995919, PULLER (SEAL-PINION,CAM-CRANKSHAFT)B200-6304

 

Accessory installation

29
IMG-433229
 


Use special tool: T9814089, Anti-static strap

30
IMG-433430
 

Caution!
Take extra care when handling the component.

Install component that comes with the accessory kit.

31
IMG-433240
 

Reinstall the removed parts in reverse order.

32
IMG-433271
 

Install the screws.


Tightening torque: Steering wheel module, to Steering column , 2.8 Nm


Use special tool: T9814199, Torque wrench

 

Installation

33
IMG-433671
 

Install the marked component.

34
IMG-433665
 

Install the marked component.

Reinstall the screws.

35
IMG-433661
 

Install the marked component.

 

Removal

36
IMG-433385
 

Note!
The graphic shows the back of the component before removal.

37
IMG-433455
 

Use: Interior trim remover

Repeat on the other side.

38
IMG-433456
 

Use: Interior trim remover

Repeat on the other side.

39
IMG-433480
 

Remove the marked part.

40
IMG-433735
 

Remove the marked part.

Repeat on the other side.

 

Accessory installation

41
IMG-433690
 

Repeat on the other side.

42
IMG-433697
 

Note!
Only use moderate force.

43
IMG-395820
 

Note!
Press the wire into the grove to secure it.

Position/route the cable harness as illustrated.

44
IMG-395825
 

Note!
Press the wire into the grove to secure it.

Position/route the cable as illustrated.

45
IMG-433425
 

Install the marked component.

Install the screw.


Tightening torque: Steering wheel to steering column (center screw) , 60 Nm

46
IMG-395968
 

Connect the connectors.

47
IMG-433491
 

Connect the connector.

48
IMG-396040
 

Warning!
Make sure that the component has locked properly in position by pulling it towards you.

Install the marked component.

 

Installation

49
IMG-400003
 

Reinstall the battery's negative cable.


Tightening torque: Battery cable for battery , 6 Nm

50
IMG-242268
 

Download software (application) for the accessory's function according to the service information in VIDA.

Order and download software according to: 31428189