Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
XC60 2020
XC60 (18-) 2020 B420T, XC60 (18-) 2020 D420T2, XC60 (18-) 2020 D420T8

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
321470591.132207779
Electric engine heater, 230 V




IMG-462843




 

Special tools

 

999 7669 Key

Tool number:999 7669

Tool description:Key

Tool boards:20

 

951 2955 Cover

Tool number:951 2955

Tool description:Cover

Tool boards:20

 

981 4192 Hose

Tool number:981 4192

Tool description:Hose

Tool boards:EU99

 

951 2957 Coolant Reservoir

Tool number:951 2957

Tool description:Coolant Reservoir

Tool boards:20


Equipment
IMG-345497
IMG-239664
IMG-240693
IMG-239660
IMG-239940

IMG-466189

IMG-462776


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Color symbols

2
IMG-400010
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

  7. Used for accessory components.

 

Removal

3
IMG-430856
 

Open the hood.

Raise the car.

4
IMG-459715
 

Note!
Orientation view

5
IMG-403425
 

Remove the marked detail/details.

Use: Pliers 31423632

6
IMG-426018
 

Remove the screws.

Remove the marked part.

7
IMG-459717
 

Remove the screws.

Remove the marked part.

8
IMG-466170
 

Remove the screw.

9
IMG-459719
 

Remove the screws.

Remove the marked part.

10
IMG-459720
 

Remove the clips.

11
IMG-457295
 

Remove the nuts.

 

Vehicles with air suspension

12
IMG-406660
 
 

All vehicles

13
IMG-459738
 

Note!
The graphic shows the back of the component before removal.

14
IMG-430845
 

Remove the marked part.

15
IMG-463472
 

Remove the screws.

Remove the marked part.

16
IMG-463476
 

Remove the screw.

17
IMG-420663
 

Remove the screws.

Remove the clips.

Remove the marked part.

18
IMG-463415
 

Remove the clips.

Remove the screws.

19
IMG-463414
 
 

Applies to the left-hand side:

20
IMG-463416
 

Remove the cable harness clips.

 

Applies to the right-hand side

21
IMG-463417
 

Remove the cable harness clips.

22
IMG-463418
 

Remove the marked part.

23
IMG-400006
 

Drain the cooling system according to service information in VIDA:

Information / Repair / Cleaning, Inspection and Adjustment / 2 Engine with mountings and equipment / 26 Cooling system / 261 radiator and connections / Cooling system – draining, charging and bleeding.


Use special tool: T9997669, Key

 

Accessory installation

24
IMG-463422
 

Locate relevant marking.

25
IMG-430742
 
26
IMG-430740
 

Use: Air-powered air saw

27
IMG-456272
 

Install component that comes with the accessory kit.

Check that the flange of the part is in full contact with bumper cover.

Adjust the hole with a file or knife as necessary.

28
IMG-456274
 

Install component that comes with the accessory kit.

29
IMG-457303
 

Note!
Note the position.

30
IMG-456301
 

Note!
Do not fully tighten the nut yet.

Install components that come with the accessory kit.

31
IMG-456305
 

Install component that comes with the accessory kit.

This is used as a counterhold.

32
IMG-457065
 

Tighten the nut.

33
IMG-430880
 

Note!
Orientation view

Ground connection

34
IMG-430905
 

Release the catches.

Fold marked part aside.

35
IMG-430885
 

Remove the nut.

The part is to be reused.

36
IMG-463499
 

Position/route the cable as illustrated.

37
IMG-463444
 

Connect the prerouted cable.

38
IMG-463441
 

Reinstall the removed part.

39
IMG-463443
 

Install the nut.


Tightening torque: M6 , 10 Nm

40
IMG-441390
 

Caution!
No grease on contact surfaces.

Cable from front socket

Lubricate the O-ring.

41
IMG-445566
 
  1. Cable from front socket

  2. Engine heater cable

Connect the cable.

Install the catch.

42
IMG-463451
 

Place the cable tie as illustrated.

43
IMG-463479
 

Place the component where indicated in the graphic.

Tighten the cable tie.

44
IMG-462714
 

Note!
Orientation view

45
IMG-463540
 

Position/route the cable as illustrated.

46
IMG-463542
 

Position/route the cable as illustrated.

Install the cable.

Use a cable tie

47
IMG-463543
 

Install a clips onto the upper edge of the subframe.

Position/route the cable as illustrated.

Install the cable.

48
IMG-462719
 

Position/route the cable as illustrated.

Install the cable.

Use a cable tie

49
IMG-465316
 

Note!
Orientation view

  1. Steering gear

  2. Cable harness

  3. Engine heater cable

50
IMG-462742
 

Caution!
The cable ties must not be assembled around the steering gear wiring harness.


Note!
Fasten the cable ties without tightening.

Position/route the cable as illustrated.

Install the cable.

Use a cable tie

51
IMG-463899
 

Undo the hose from the connection.

52
IMG-463902
 
53
IMG-463904
 

Remove the clip.

54
IMG-465222
 

Remove a piece of the protective cover.

55
IMG-465223
 

Remove the clip.

Remove the marked part.

56
IMG-463910
 

Clean the surface.

57
IMG-465196
 

Remove the protective film.

58
IMG-463912
 

Install components that come with the accessory kit.

Tighten the bolts.

59
IMG-463919
 

Assemble components that come with the accessory kit.

60
IMG-463920
 

Connect the hose.

61
IMG-463925
 

Attach the hose clamp

Connect the hose.

Tighten the hose clamp.

62
IMG-463932
 
63
IMG-463937
 

Use: Scribe

Use: Pop rivet pliers

64
IMG-441390
 

Caution!
No grease on contact surfaces.

Lubricate the O-ring.

65
IMG-463942
 

Connect the cable.

Install the catch.

66
IMG-465285
 

Fasten the cable tie without tightening.

Adjust the cable position so that it can follow the motions of the engine.

Tighten the cable tie.

67
IMG-465329
 

Tighten the cable ties.

 

Installation

68
IMG-400006
 

Fill the cooling system according to the service information in VIDA:

Information / Repair / Cleaning, Inspection and Adjustment / 2 Engine with mountings and equipment / 26 Cooling system / 261 radiator and connections / Cooling system – draining, charging and bleeding.


Use special tool: T9997669, Key

Use special tool: T9512955, Cover

Use special tool: T9814192, Hose

Use special tool: T9512957, Coolant Reservoir

69
IMG-377070
 

Reinstall the removed parts in reverse order.

70
IMG-405228
 

Note!
Make sure to follow the sequence indicated.


Tightening torque: Aluminum wheel rim to wheel hub
Stage 1: 4 Nm
Stage 2: 50 Nm
Stage 3: 140 Nm