| | |
| | Read through all of the instructions before starting installation. Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation. Ensure that all tools stated in the instructions are available before starting installation. Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps. In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.
|
| | |
| | When installing, the car must retain a temperature of 20 degrees C. After installation, the car must not be washed for 48 hours There may be parts in the accessories kit that are not needed for this installation. |
| | |
| | IMG-363036 |
|
| | Note! This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps. |
Used for focused component, the component with which you will do something. Used as extra colors when you need to show or differentiate additional parts. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc. Used when the component is not fully removed from the vehicle but only hung to the side. Used for standard tools and special tools. Used as background color for vehicle components.
|
| | |
| | IMG-292826 |
|
| | |
| | IMG-308353 |
|
| | |
| | IMG-308354 |
|
| | |
| | IMG-286863 |
|
| | Caution! The front and upper sill panel must be removed and installed as one unit. |
|
| | IMG-308355 |
|
| | |
| | IMG-308356 |
|
| | |
| | IMG-344451 |
|
| | |
| | IMG-269484 |
|
| | Fold the carpet to the side. |
| | IMG-307603 |
|
| | Locate the rubber grommet under the insulation and press it out. |
| | IMG-342372 |
|
| | Repeat on the other side. |
| | IMG-360124 |
|
| | |
| | IMG-377298 |
|
| | |
| | IMG-377299 |
|
| | |
| | IMG-377300 |
|
| | |
| | IMG-377302 |
|
| | |
| | IMG-377309 |
|
| | |
| | IMG-377320 |
|
| | |
| | IMG-360186 |
|
| | |
| | IMG-307605 |
|
| | Remove the weatherstrips. |
| | IMG-307606 |
|
| | |
| | IMG-307607 |
|
| | |
| | IMG-343420 |
|
| | |
| | IMG-377345 |
|
| | |
| | IMG-377347 |
|
| | Release the catches. Remove the panel. |
| | IMG-307608 |
|
| | |
| | IMG-307609 |
|
| | |
| | IMG-377342 |
|
| | |
| | IMG-346921 |
|
| | |
| | IMG-346811 |
|
| | |
| | IMG-346861 |
|
| | Remove the screws. Remove the panel. |
| | IMG-377350 |
|
| | |
| | IMG-377352 |
|
| | |
| | IMG-307623 |
|
| | |
| | IMG-307624 |
|
| | |
| | Vehicles with headlamp washers |
| | IMG-307625 |
|
| | Fold the wing liner to one side. |
| | IMG-378537 |
|
| | Place a container under the car. Take a piece of washer hose. Tie a knot in it and place it on the washer pump to prevent the washer fluid reservoir from emptying. Release the lock. Remove the hose. |
| | |
| | IMG-307627 |
|
| | |
| | IMG-307683 |
|
| | |
| | IMG-307684 |
|
| | Fold the wing liner to one side. |
| | IMG-307685 |
|
| | |
| | IMG-378285 |
|
| | Release the connector's catch. Disconnect the connector. |
| | IMG-307687 |
|
| | RHD: The procedure is carried out on the opposite side. |
| | IMG-307688 |
|
| | RHD: The procedure is carried out on the opposite side. |
| | IMG-307689 |
|
| | Raise the car. Remove the clips. |
| | IMG-377609 |
|
| | Remove the clips. Remove the screws. |
| | IMG-377615 |
|
| | |
| | IMG-377617 |
|
| | Caution! Place the Bumper Cover on a suitable surface. |
|
| | IMG-379040 |
|
| | Repeat on the other side. |
| | |
| | IMG-379041 |
|
| | Repeat on the other side. |
| | IMG-379042 |
|
| | Repeat on the other side. |
| | IMG-379043 |
|
| | Put the wiring in the Bumper cover without installing the wiring. RHD: The cable harness is positioned mirrored. |
| | IMG-377676 |
|
| | |
| | IMG-377677 |
|
| | |
| | IMG-379044 |
|
| | Repeat on the other side. |
| | IMG-379045 |
|
| | Repeat on the other side. |
| | IMG-379079 |
|
| | Repeat on the other side. |
| | IMG-379081 |
|
| | |
| | |
| | IMG-377720 |
|
| | |
| | IMG-307882 |
|
| | |
| | Right-hand drive vehicles |
| | IMG-377719 |
|
| | |
| | IMG-307886 |
|
| | |
| | IMG-307903 |
|
| | |
| | |
| | IMG-307909 |
|
| | |
| | IMG-273585 |
|
| | |
| | IMG-273586 |
|
| | |
| | IMG-273587 |
|
| | |
| | IMG-273588 |
|
| | |
| | Right-hand drive vehicles |
| | IMG-273585 |
|
| | |
| | IMG-307910 |
|
| | |
| | IMG-307911 |
|
| | |
| | IMG-307912 |
|
| | |
| | IMG-307913 |
|
| | |
| | IMG-307914 |
|
| | |
| | |
| | IMG-236054 |
|
| | |
| | IMG-377670 |
|
| | |
| | IMG-377675 |
|
| | Pull the wiring through. Insert the cable in to the passenger compartment, adjust the cable length out into the engine compartment and secure the rubber grommet. |
| | |
| | IMG-377671 |
|
| | Release the connector's secondary lock. Connect the pre-routed cables to the 6-pin connector. Depress the secondary lock. |
| | Right-hand drive vehicles |
| | IMG-377672 |
|
| | Release the connector's secondary lock. Connect the pre-routed cables to the 6-pin connector. Depress the secondary lock. |
| | |
| | IMG-377673 |
|
| | |
| | IMG-249181 |
|
| | |
| | IMG-377674 |
|
| | |
| | Right-hand drive vehicles |
| | IMG-308083 |
|
| | |
| | |
| | IMG-308084 |
|
| | |
| | IMG-308085 |
|
| | |
| | IMG-308086 |
|
| | |
| | IMG-308103 |
|
| | |
| | IMG-377590 |
|
| | Disconnect the connector, if applicable. Attach the connector to the wiring harness. Use: , Electrical tape
|
| | IMG-377588 |
|
| | Disconnect the connectors. |
| | IMG-377586 |
|
| | |
| | IMG-377587 |
|
| | Install component that comes with the accessory kit. |
| | IMG-377589 |
|
| | |
| | IMG-377594 |
|
| | Connect the prerouted cable. |
| | IMG-308105 |
|
| | Attach any excess wire to the wiring harness. |
| | |
| | IMG-377718 |
|
| | |
| | |
| | IMG-307905 |
|
| | |
| | Right-hand drive vehicles |
| | IMG-307906 |
|
| | |
| | IMG-307907 |
|
| | |
| | |
| | IMG-377070 |
|
| | Reinstall the removed parts in reverse order. |
| | IMG-242268 |
|
| | Download software (application) for the accessory's function according to the service information in VIDA. |