Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
V60 2013
V60 (-18) 2013 L.H.D

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
313300841.130756503, 30756499
Net pocket, tunnel console




IMG-285729




 
Equipment
A0000162
IMG-239940
IMG-239660
IMG-239681

IMG-285730


 
  

INTRODUCTION

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 
1
IMG-282528
 

2
IMG-292243
 

  • Place the mesh pocket on the panel with the front edge of the clips 4 mm (5/32") from the panel's front and rear edge. Attach the mesh pocket using tape to secure it.


Note!

Take care not to damage the pocket lugs.


  • Drill holes through the clips and through the panel. Use a Ø5 mm (13/64") drill bit.

  • File down the edges of the holes.

3
IMG-292244
 

  • Position the mesh pocket with the clips against the holes in the side panel. Turn the pocket's buttons (1) outwards.

  • Rivet the clips with the mesh pocket to the panel.


Note!

Ensure that the pocket is not trapped by the rivet heads.


4
IMG-285736