2020 L.H.D

Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
XC40 2020

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
316590061.032353297, 31659003
Luggage compartment sill moulding




Materials

Designation

Part number

Isopropanol


Equipment
IMG-345497
IMG-239664

IMG-463261


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Color symbols

2
IMG-400010
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

  7. Used for accessory components.

 

Removal

3
IMG-463203
 
4
IMG-463202
 
5
IMG-463204
 
6
IMG-463205
 
7
IMG-463206
 

Remove the screw.


Tightening torque: Seat belt guide, to Bracket , 4.5 Nm

8
IMG-463208
 

Remove the panel.

9
IMG-463209
 

Remove the marked part.

10
IMG-434662
 
11
IMG-436040
 

Loosen the marked detail.

Repeat on the other side.

12
IMG-430255
 

Remove the marked part.

13
IMG-436415
 

Remove the marked part.

14
IMG-435741
 

Remove the marked part.

15
IMG-434665
 

Remove the marked detail/details.

16
IMG-434666
 

Remove the screws.

17
IMG-434667
 

Loosen the screws.

Remove the marked part.

18
IMG-463211
 

Remove the marked part.

Disconnect the connector, if applicable.

19
IMG-463215
 

Remove the panel.

Disconnect the connector.

 

Accessory installation

20
IMG-463218
 

Disconnect the connector.

21
IMG-445065
 

Install component that comes with the accessory kit.

Connect the connectors.

22
IMG-463220
 

Position/route the cable harness as illustrated.

Install the wiring harness.

Use a cable tie

23
IMG-463221
 

Position/route the cable harness as illustrated.

Install the wiring harness.

Use a cable tie

24
IMG-463241
 

Connect the connector.

25
IMG-463247
 

Position/route the cable harness as illustrated.

Install the wiring harness.

Use a cable tie

26
IMG-463248
 

Position/route the cable harness as illustrated.

Install the wiring harness.

Use a cable tie

27
IMG-463252
 

Install components that come with the accessory kit.

 

Vehicles without Suspension Module (SUM)

28
IMG-463254
 

Install the marked components.

Use a cable tie

 

Vehicles with Suspension Module (SUM)

29
IMG-463750
 

Clean the surface.

Use: , Isopropanol

30
IMG-463751
 

Remove the protective film.

31
IMG-463752
 

Note!
Press and apply pressure to the part over the tape for at least 20 seconds.

 

All vehicles

32
IMG-463253
 

Connect the connector.

Reinstall the removed part.

33
IMG-463255
 

Install component that comes with the accessory kit.

Make sure that the weather strip goes on top of the panel.

Use: Interior trim remover

34
IMG-463284
 

Reinstall the screws.

Tighten the bolts.


Tightening torque: Luggage compartment sill moulding to body , 4.5 Nm

35
IMG-463257
 

Install the marked components.

36
IMG-463260
 

Connect the connector.

37
IMG-463258
 

Remove the protective film.

Repeat on the other side.

38
IMG-463259
 

Remove any traces of glue.

Använd en blandning av 50% Volvo koncentrerad spolarvätska och 50% vatten.

Repeat on the other side.

 

Installation

39
 

Reinstall the removed parts in reverse order.