2014 L.H.D

Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
S60 2014
S60 (11-18) 2014 B4204T10, S60 (11-18) 2014 B4204T12, S60 (11-18) 2014 B4204T11, S60 (11-18) 2014 D4204T5, S60 (11-18) 2014 B4204T15

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
314143421.031408281
Battery Charger (R-design)




IMG-374223




Special tools

 

951 2782 Rivet nut tool

Tool number:951 2782

Tool description:Rivet nut tool

Tool boards:08


Materials

Designation

Part number

Electrical tape

Isopropanol

1161721


Equipment
IMG-345497

IMG-381738

IMG-381739

IMG-381750

IMG-378792


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Conditions

2
 

There may be parts in the accessories kit that are not needed for this installation.

 

Color symbols

3
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Removal

4
IMG-332179
 
  1. Set the ignition key to position 0.

  2. Remove the battery's negative cable.

5
IMG-352021
 


Tightening torque: Wheel to wheel hub
Stage 1: 20 Nm
Stage 2: 140 Nm

6
IMG-374248
 

Remove the screws.

7
IMG-374249
 

Remove the screws.

8
IMG-374303
 
9
IMG-374250
 

Remove the nuts.

10
IMG-374255
 
11
IMG-374576
 

Remove the tape.

 

Accessory installation

12
IMG-374853
 


Use special tool: T9512782, Rivet nut tool

 

Removal

13
IMG-374298
 

Note!
Orientation view

14
IMG-374268
 

Note!
The graphic shows the back of the component before removal.

15
IMG-374271
 
16
IMG-341927
 

Release the lock.

Remove the clips.

17
IMG-374366
 

Remove the screws.

18
IMG-374373
 
 

Accessory installation

19
IMG-378803
 

Clean the Bumper Cover surface.

20
IMG-378804
 

Note!
Check that the bar scale is correct.

Use the template in the installation instructions.

21
IMG-378808
 

Use tape

22
IMG-378809
 
23
IMG-375971
 

Deburr edges

24
IMG-381751
 
25
IMG-351436
 

Pull the wiring through.

26
IMG-381752
 
27
IMG-374227
 
28
IMG-374308
 
29
IMG-374378
 

Note!
Orientation view

30
IMG-374375
 
31
IMG-381736
 

Install the screw.

32
IMG-374441
 

Note!
Orientation view

33
IMG-374442
 
34
IMG-374440
 
35
IMG-374446
 
36
IMG-374451
 

Install the clip(s).

37
IMG-374470
 
38
IMG-374472
 
39
IMG-374474
 

Install the clip(s).

 

Vehicles with Alarm siren

 

Removal

40
IMG-374826
 

Note!
Orientation view

41
IMG-374832
 

Disconnect the connector.

42
IMG-374828
 

Remove the screws.

 

All vehicles

 

Accessory installation

43
IMG-374553
 
44
IMG-374568
 
45
IMG-374562
 

Install the screws.

46
IMG-375848
 

Install the clip(s).

47
IMG-374835
 
48
IMG-374570
 

Install the catch.

49
IMG-374571
 

Install the cables.

 

Vehicles with Alarm siren

50
IMG-374843
 
51
IMG-375218
 
52
IMG-374862
 

Install the screw.

53
IMG-374856
 

Install the screws.

54
IMG-374860
 

Connect the connector.

 

Vehicles without Alarm siren

55
IMG-375885
 
56
IMG-375218
 
57
IMG-374862
 

Install the screw.

58
IMG-375886
 

Install the screws.

Install the nuts

 

All vehicles

59
IMG-374863
 
60
IMG-374882
 
61
IMG-381741
 

Install the clip(s).

62
IMG-374963
 
63
IMG-374526
 
64
IMG-375011
 
65
IMG-375030
 

Note!
Orientation view

66
IMG-375035
 
67
IMG-375042
 
68
IMG-375049
 

Install the clip(s).

 

Removal

69
IMG-378646
 

Fold the insulation to one side.

Pull the wiring through.

70
IMG-378648
 

Pull the wiring through.

Refit the insulation.

71
IMG-381243
 

Remove the cable harness clips.

72
IMG-381261
 

Remove the cable harness clips.

73
IMG-376160
 

Disconnect the connector.

74
IMG-376158
 

Loosen the hose clamp.

75
IMG-376159
 
76
IMG-375085
 
77
IMG-375093
 
78
IMG-375099
 
79
IMG-375100
 
80
IMG-375894
 

Remove the screw.

81
IMG-375896
 
 

Accessory installation

82
IMG-375102
 
 

Installation

83
IMG-375894
 

Reinstall the screw.

 

Accessory installation

84
IMG-375103
 
85
IMG-375104
 

Install the clip(s).

86
IMG-375105
 
87
IMG-375109
 
88
IMG-375110
 

Install the screw.


Tightening torque: M6 , 10 Nm

 

Removal

89
IMG-375129
 
90
IMG-375131
 
91
IMG-375143
 
92
IMG-375146
 

Caution!
Cut carefully to avoid unintentional damage or personal injury.

 

Accessory installation

93
IMG-375150
 

Use: Expander pliers

94
IMG-375151
 

Pull the wiring through.

95
IMG-376501
 

Use: , Electrical tape

Wrap tape around the cable to increase the diameter.

Increase the diameter to 6.5 mm.

96
IMG-375153
 

Remove the nut.

97
IMG-375161
 


Tightening torque: M6 , 10 Nm

Install the nut.

98
IMG-376433
 
99
IMG-376438
 
100
IMG-376507
 

Clean the surface.

Use: 1161721, Isopropanol

101
IMG-376511
 

Use: , Electrical tape

102
IMG-376442
 
 

Installation

103
IMG-375167
 
104
IMG-375093
 
105
IMG-375168
 
106
IMG-375169
 
107
IMG-381243
 
108
IMG-381261
 
109
IMG-376165
 
110
IMG-376158
 
111
IMG-376171
 
112
IMG-375172
 
 

Accessory installation

113
IMG-381188
 
114
IMG-377070
 

Reinstall the removed parts in reverse order.