Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
V90 Cross Country 2020
L.H.D

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
316501481.132286628, 32259554, 31650145, 30795572
Parking assistance, camera, rear




 

Special tools

 

999 5919 PULLER (SEAL-PINION,CAM-CRANKSHAFT)B200-6304

Tool number:999 5919

Tool description:PULLER (SEAL-PINION,CAM-CRANKSHAFT)B200-6304

Tool boards:46

 

981 4199 Torque wrench

Tool number:981 4199

Tool description:Torque wrench

Tool boards:08


Materials

Designation

Part number

Cable tie, 750 mm

988734

Electrical tape

Lubricant

1161150


Equipment
A0000162
IMG-239664
IMG-239667

IMG-428425


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Conditions

2
 

There may be parts in the accessories kit that are not needed for this installation.

 

Color symbols

3
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

4
IMG-394535
 
 

Removal

5
 

Note!
The removal steps may contain installation details.

6
IMG-383769
 

Note!
The graphic shows the back of the component before removal.

7
IMG-412247
 

Note!
Perform the procedure one side at a time.


Use special tool: T9995919, PULLER (SEAL-PINION,CAM-CRANKSHAFT)B200-6304

Disconnect the connector.

8
IMG-414590
 

Remove the panel.

9
IMG-412242
 

Remove the panel.

Disconnect the connector, if applicable.

10
IMG-414575
 

Remove the panel.

11
IMG-414580
 

Remove the panel.

Disconnect the connector, if applicable.

12
IMG-414585
 

Remove the screws.

Remove the panel.

13
IMG-422101
 
14
IMG-414613
 
15
IMG-414614
 

Remove the panel.

16
IMG-414995
 
17
IMG-415046
 

Note!
The graphic shows the back of the component before removal.

18
IMG-415047
 

Remove the panel.

Use hands only.

19
IMG-415049
 

Release the catch.

Remove the marked part.

20
IMG-418522
 

Remove the panel.

Use hands only.

21
IMG-418525
 

Remove the screw.


Tightening torque: M6 , 10 Nm

22
IMG-414411
 

Release the lock.

Repeat on the other side.

Remove the marked part.

23
IMG-414483
 

Remove the panel.

Disconnect the connector, if applicable.

24
IMG-422120
 

Caution!
Make sure that the seat backrest upholstery (fold down position) is not damaged by contact with the floor!

25
IMG-422101
 
26
IMG-414520
 
27
IMG-397280
 

Remove the marked part.

28
IMG-397244
 

Detach the panel.

29
IMG-397247
 

Remove the panel.

30
IMG-383130
 

Remove the screws.


Tightening torque: Front seat to body , 40 Nm

31
IMG-414525
 
32
IMG-414515
 

Remove the screws.


Tightening torque: Front seat to body , 40 Nm

33
IMG-383134
 
34
IMG-396605
 

Disconnect the connector.

35
IMG-396606
 

Unhook the cable harness clips.

36
IMG-414526
 
37
IMG-416201
 

Remove the screws.

Fold marked part aside.

38
IMG-415092
 

Remove the marked part.

 

Right-hand drive vehicles

39
IMG-394096
 

Remove the marked part.

The part is to be reused.

40
IMG-394081
 

Remove the screw.

The part is to be reused.

41
IMG-394105
 

Remove the marked part.

42
IMG-394078
 

Disconnect the connector.

43
IMG-426665
 

Remove the marked part.

 

All vehicles

44
IMG-407110
 
45
IMG-414611
 

Remove the marked part.

46
IMG-415830
 

Repeat on the other side.

47
IMG-415831
 

Remove the screw.


Tightening torque: M6 , 10 Nm

Repeat on the other side.

48
IMG-416086
 
49
IMG-416087
 

Remove the marked part.

 

Vehicles with keyless entry

50
IMG-413321
 
 

All vehicles

51
IMG-415835
 

Remove the screws.

52
IMG-416089
 

Remove the marked part.

53
IMG-418545
 

Disconnect the connectors.

Remove the panel.

54
IMG-418696
 

Remove the screws.

55
IMG-418703
 

Note!
The graphic shows the back of the component before removal.

56
IMG-418710
 

Remove the panel.

57
IMG-418626
 

Remove the panel.

58
IMG-418631
 

Remove the panel.

59
IMG-418634
 

Remove the screws.

Remove the panel.

60
IMG-418641
 

Disconnect the connector.

61
IMG-418643
 

Loosen the screws.

Loosen the exact number of turns indicated in the image.

62
IMG-418645
 

Use: Interior trim remover

The part is not to be reused.

 

Accessory installation

63
IMG-426635
 
64
IMG-426636
 
65
IMG-418648
 

Tighten the bolts.


Use special tool: T9814199, Torque wrench

66
IMG-418642
 

Connect the connector.

67
IMG-418825
 

Loosen the marked detail/details.

To be repeated in the other end of the component.

68
IMG-418831
 

Release the catches.

Loosen the marked detail/details.

Use: Scribe

Use: Interior trim remover

To be repeated in the other end of the component.

69
IMG-419675
 

Use: 988734, Cable tie, 750 mm

70
IMG-419680
 

Use: , Electrical tape

71
IMG-426796
 
72
IMG-426795
 

Pull the wiring through.

73
IMG-426797
 

Position/route the cable as illustrated.

Install the cable.

Use a cable tie

74
IMG-419805
 

Pull the wiring through.

Use: 1161150, Lubricant

Wipe off

Remove the cable tie(s).

75
IMG-419818
 

Pull the wiring through.

76
IMG-418850
 

Reinstall the removed part.

To be repeated in the other end of the component.

77
IMG-418841
 

Caution!
Make sure that the rubber grommet seals properly to the body.

Reinstall the removed part.

To be repeated in the other end of the component.

78
IMG-426599
 

Route the wire adjacent to existing wirings.

Install the cable.

Use a cable tie

79
IMG-426597
 

Route the wires adjacent to existing wirings.

Install the cables.

Use a cable tie

80
IMG-427770
 

Position/route the cable as illustrated.

Install the cable.

Use a cable tie

81
IMG-415163
 

Connect the prerouted cable.

82
IMG-426643
 

Route the wire adjacent to existing wirings.

 

Right-hand drive vehicles

83
IMG-427805
 
 

All vehicles

84
IMG-426646
 

Install the cable.

Use a cable tie

85
IMG-416389
 

Fold marked part aside.

86
IMG-426585
 

Position/route the cable as illustrated.

Install the cable.

Use a cable tie

87
IMG-426588
 

Note!
Route the wiring between floor carpet and air duct.

Position/route the cables as illustrated.

Use tape

88
IMG-426590
 

Position/route the cables as illustrated.

89
IMG-426595
 

Route the wires adjacent to existing wirings.

Install the cables.

Use a cable tie

90
IMG-426648
 

Route the wires adjacent to existing wirings.

Install the cables.

Use a cable tie

91
IMG-426631
 

Position the cable harness excess as illustrated.

Use a cable tie

 

Applies to model V90 manufactured between chassis number 050777-084084. Applies to model V90CC manufactured between chassis number 026819-066036.

92
 

Note!
Make sure that the vehicle has the latest software status

 

All vehicles

93
IMG-242268
 

Download software (application) for the accessory's function according to the service information in VIDA. See VIDA or the accessories catalogue for software part number.

 

Installation

94
IMG-400000
 

Reinstall the removed parts in reverse order.