Information

• Read through all of the instructions before starting installation.

• Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

• Ensure that all tools stated in the instructions are available before starting installation.

• Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

• In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

Conditions

There may be parts in the accessories kit that are not needed for this installation.

Color symbols

1. Used for focused component, the component with which you will do something.

2. Used as extra colors when you need to show or differentiate additional parts.

3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

4. Used when the component is not fully removed from the vehicle but only hung to the side.

5. Used for standard tools and special tools.

6. Used as background color for vehicle components.

Removal

Remove the panel.

Fold the carpet aside.

Fold the insulation aside.

Fold the insulation aside.

Locate the rubber grommet under the insulation and press it out.

Raise the car.

Fold the wing liner aside.

Accessory installation

Release the lock.

Use: 1161427, Low temperature grease

Install the catch.

Install the cable.

Use: 1161427, Low temperature grease

Install the catch.

Install the catch.

Install a clips onto the upper edge of the subframe.

Loosen the screws.

Tightening torque: M6 , 10 Nm

Loosen the screws.

Tightening torque: M8 , 24 Nm

Reinstall the screw.

Refit the insulation.

Refit the insulation.

Fold the floor carpet back.

Take a scriber and make a hole in the carpet opposite the two holes in the bracket.

Make a cut in the mat.

Use: 1161427, Low temperature grease

Install the catch.

Installation