Information

• Read through all of the instructions before starting installation.

• Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

• Ensure that all tools stated in the instructions are available before starting installation.

• Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

• In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

Color symbols

1. Used for focused component, the component with which you will do something.

2. Used as extra colors when you need to show or differentiate additional parts.

3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

4. Used when the component is not fully removed from the vehicle but only hung to the side.

5. Used for standard tools and special tools.

6. Used as background color for vehicle components.

Set the ignition key to position 0.

Removal

All vehicles

Remove the marked part.

Remove the marked part.

Vehicles with subwoofer speaker

Disconnect the connector.

Remove the nuts.

Loosen the screws.

Remove the marked part.

Accessory installation

All vehicles

Install component that comes with the accessory kit.

Install the screws.

Install the screw.

Install component that comes with the accessory kit.

Connect the connector.

Install the clips as illustrated.

Locate the existing connectors in the vehicle's cable harness.

Connect the connectors.

Installation

Vehicles with subwoofer speaker

Install the screws.

Tightening torque: M6 , 10 Nm

Install the nuts

Connect the connector.

All vehicles

Carry out a download, or a re-load, of accessory function software by following VIDA service information.