| | |
| | Read through all of the instructions before starting installation. Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation. Ensure that all tools stated in the instructions are available before starting installation. Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps. In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.
|
| | |
|  | | IMG-363036 |
|
| | Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps. |
Used for focused component, the component with which you will do something. Used as extra colors when you need to show or differentiate additional parts. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc. Used when the component is not fully removed from the vehicle but only hung to the side. Used for standard tools and special tools. Used as background color for vehicle components.
|
| | |
|  | | IMG-426132 |
|
| | |
|  | | IMG-400002 |
|
| | Remove the battery's negative cable. |
|  | | IMG-395203 |
|
| | |
|  | | IMG-433590 |
|
| | Release the lock. Use: Electrician's screwdriver
Use: Interior trim remover
|
|  | | IMG-395232 |
|
| | |
|  | | IMG-433586 |
|
| | Release the lock. Use: Electrician's screwdriver
Use: Interior trim remover
Turn the steering wheel into neutral position. |
|  | | IMG-433236 |
|
| | |
|  | | IMG-433646 |
|
| | |
|  | | IMG-433670 |
|
| | |
|  | | IMG-433673 |
|
| | |
|  | | IMG-395260 |
|
| | |
|  | | IMG-433450 |
|
| | Remove the screws. Remove the marked part. |
| | | IMG-395203 |
|
| | |
|  | | IMG-433205 |
|
| | |
|  | | IMG-433212 |
|
| | |
|  | | IMG-433220 |
|
| | |
| | | IMG-395232 |
|
| | |
|  | | IMG-433221 |
|
| | |
|  | | IMG-433222 |
|
| | Release the lock. Turn the steering wheel into neutral position. |
|  | | IMG-433452 |
|
| | Loosen the marked detail/details. |
|  | | IMG-433490 |
|
| | Warning!
When temporarily storing a pyrotechnical component, it must always be positioned with its active part (e.g. air bag front or equivalent) facing up. |
Release the connector's catch. Use: Electrician's screwdriver
Disconnect the connector. |
|  | | IMG-395470 |
|
| | Disconnect the connector. |
|  | | IMG-433226 |
|
| | Remove the screw. Remove the marked part. |
|  | | IMG-433271 |
|
| | |
|  | | IMG-433240 |
|
| | Note!
The graphic shows the back of the component before removal. |
Disconnect the connectors. Remove the cable harness clips. |
|  | | IMG-433426 |
|
| | Tilt the component somewhat. Release the catch. Remove the marked part.
Use special tool: T9995919, PULLER (SEAL-PINION,CAM-CRANKSHAFT)B200-6304
|
| | |
|  | | IMG-433229 |
|
| |
Use special tool: T9814089, Anti-static strap
|
|  | | IMG-433430 |
|
| | Caution!
Take extra care when handling the component. |
Install component that comes with the accessory kit. |
| | | IMG-433240 |
|
| | Reinstall the removed parts in reverse order. |
| | | IMG-433271 |
|
| | Install the screws.
Tightening torque: Steering wheel module, to Steering column
, 2.8 Nm
Use special tool: T9814199, Torque wrench
|
| | |
|  | | IMG-433671 |
|
| | Install the marked component. |
|  | | IMG-433665 |
|
| | Install the marked component. Reinstall the screws. |
|  | | IMG-433661 |
|
| | Install the marked component. |
| | |
|  | | IMG-433385 |
|
| | Note!
The graphic shows the back of the component before removal. |
|
|  | | IMG-433455 |
|
| | Use: Interior trim remover
Repeat on the other side. |
|  | | IMG-433456 |
|
| | Use: Interior trim remover
Repeat on the other side. |
|  | | IMG-433480 |
|
| | |
|  | | IMG-433735 |
|
| | Remove the marked part. Repeat on the other side. |
| | |
|  | | IMG-433690 |
|
| | Repeat on the other side. |
|  | | IMG-433697 |
|
| | Note!
Only use moderate force. |
|
|  | | IMG-395820 |
|
| | Note!
Press the wire into the grove to secure it. |
Position/route the cable harness as illustrated. |
|  | | IMG-395825 |
|
| | Note!
Press the wire into the grove to secure it. |
Position/route the cable as illustrated. |
|  | | IMG-433425 |
|
| | Install the marked component. Install the screw.
Tightening torque: Steering wheel to steering column (center screw)
, 60 Nm
|
|  | | IMG-395968 |
|
| | |
|  | | IMG-433491 |
|
| | |
|  | | IMG-396040 |
|
| | Warning!
Make sure that the component has locked properly in position by pulling it towards you. |
Install the marked component. |
| | |
|  | | IMG-400003 |
|
| | Reinstall the battery's negative cable.
Tightening torque: Battery cable for battery
, 6 Nm
|
|  | | IMG-242268 |
|
| | Download software (application) for the accessory's function according to the service information in VIDA. Order and download software according to: 31428189
|
