Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
S60 2014
S60 (11-18) 2014

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
313503991.731414956, 31414677, 31414676, 31414606, 31414605, 31414543, 31399166, 31399165, 31399164
Sensus Connected Touch




IMG-378798




 

Special tools

 

981 4116 Cylindrical knife

Tool number:981 4116

Tool description:Cylindrical knife

Tool boards:80

 

981 4089 Anti-static strap

Tool number:981 4089

Tool description:Anti-static strap

Tool boards:39


Materials

Designation

Part number

Electrical tape


Equipment
IMG-242205
IMG-345497
IMG-239981

IMG-375972

IMG-375984


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Further information

2
 

There may be parts in the accessories kit that are not needed for this installation.

These installation instructions show installation on left hand drive cars.

When installing on right-hand drive cars, perform the procedures on the opposite side and/or mirrored.

Where the procedure differs, the right-hand version is also shown with text and image.

 

Color symbols

3
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Accessory installation

4
IMG-375981
 

Note!
Orientation view

5
IMG-375982
 

Measure and mark as illustrated.

 

Removal

6
 

Note!
The removal steps may contain installation details.

7
IMG-332193
 

Set the ignition key to position 0.

8
IMG-346244
 
9
IMG-346245
 


Tightening torque: Panel A-pillar , 3 Nm

10
IMG-303484
 
11
IMG-308357
 
12
IMG-308358
 
13
IMG-346246
 
14
IMG-346247
 
15
IMG-375022
 
16
IMG-375023
 
17
IMG-375024
 

Remove the screws.


Tightening torque: M6 , 10 Nm

18
 

Repeat the steps when removing on opposite side.

 

Vehicles with roof opening panel

19
IMG-375114
 
20
IMG-375113
 
 

All vehicles

21
IMG-376439
 
22
IMG-376371
 

Remove the weatherstrips.

23
IMG-376375
 
24
IMG-376377
 
25
IMG-376380
 

Remove the screws.

26
IMG-376382
 
27
IMG-376308
 

Remove the screws.


Tightening torque: M6 , 10 Nm

28
IMG-308359
 
29
IMG-338621
 

Disconnect the connector.

30
IMG-341741
 

Remove the screws.

31
IMG-344926
 

Remove the panel.

32
IMG-344927
 

Remove the weatherstrip.

33
IMG-344928
 

Caution!
The front and upper sill panel must be removed and installed as one unit.

34
IMG-344929
 
35
IMG-344930
 
36
IMG-344451
 
37
IMG-355782
 

Remove the screws.

Detach the panel.

38
IMG-355781
 

Disconnect the connector.

Remove the panel.

39
IMG-375258
 

Remove the screws.

40
IMG-378228
 

Note!
Note the position.

Remove the screws.

41
IMG-356889
 

Disconnect the connector.

42
IMG-375053
 

Unhook the cable harness clips.

43
IMG-378229
 
 

Accessory installation

44
IMG-375379
 

Fold the carpet to the side.

45
IMG-378343
 

Caution!
Do not pull the connector when installing the wiring.

46
IMG-375534
 
47
IMG-375533
 
48
IMG-375535
 

Caution!
Do not pull the connector when installing the wiring.

49
IMG-375537
 
50
IMG-375536
 

Caution!
Ensure that the roof is not damaged.


Caution!
Take extra care not to crease the headliner.


Use special tool: T9814116, Cylindrical knife

51
IMG-375549
 
52
IMG-376434
 
53
IMG-375489
 

Note!
Make sure that the direction arrow points towards the driver.

54
IMG-375274
 

Install the catch.

55
IMG-375575
 
56
IMG-376038
 

Turn once.

Tear off the excess foam tape.

57
IMG-375577
 

Adjust the position of the wiring harness.

 

Installation

58
IMG-326818
 
59
IMG-326819
 
60
IMG-376302
 
61
IMG-303724
 
62
IMG-303744
 
63
IMG-356971
 

Repeat the steps when installing on opposite side.

64
IMG-378175
 

Install the cable.

65
IMG-341741
 

Reinstall the screws.

66
IMG-341775
 
67
IMG-376384
 
68
IMG-376385
 
69
IMG-376386
 
 

Removal

70
IMG-292804
 

Remove the panel.

71
IMG-292806
 

Fold the carpet to the side.

72
IMG-292823
 
  1. Unhook the cable harness clips.

  2. Disconnect the connector.

73
IMG-292826
 

Remove the panel.

74
IMG-292827
 

Disconnect the connector, if applicable.

75
IMG-346236
 
76
IMG-340984
 

Disconnect the connector.

77
IMG-340985
 

Remove the screws.

78
IMG-355818
 

Remove the screws.

 

Cars with automatic transmissions

79
IMG-293006
 
80
IMG-293007
 

Release the shift-lock function.

 

Cars with manual transmissions

81
IMG-354293
 

Release the catch which is located inside the gear lever boot.

Pull the locking sleeve and gear lever boot down. Take care so that the boot does not come loose from the lock ring.

82
IMG-347222
 
 

All vehicles

83
IMG-340981
 
84
IMG-293021
 
85
IMG-293022
 
86
IMG-293023
 
87
IMG-377998
 
88
IMG-377997
 
89
IMG-377999
 
90
IMG-340988
 

Remove the screws.

91
IMG-340989
 
 

Vehicles with DVD-player

92
IMG-378370
 

Note!
Orientation view

93
IMG-375072
 

Disconnect the connector, if applicable.

94
IMG-378314
 

Attach the connector to the wiring harness.

Use: , Electrical tape

The connector is not to be used.

 

All vehicles

95
IMG-375073
 

Note!
The number of connectors, cables and cable ties can vary depending on the vehicle's equipment level.

Disconnect the connectors.

96
IMG-360002
 

Note!
The graphic shows the back of the component before removal.

97
IMG-345114
 

Carefully pry loose the bottom edge of the panel and then continue around the panel.

98
IMG-360001
 
99
IMG-345115
 
100
IMG-340008
 
101
IMG-383559
 

Note!
Orientation view

102
IMG-375078
 

Disconnect the connector.

103
IMG-378314
 

Attach the connector to the wiring harness.

Use: , Electrical tape

The connector is not to be used.

104
IMG-375077
 

Note!
The number of connectors may vary depending on the vehicle's equipment level.

Disconnect the connectors.

 

Accessory installation

105
IMG-375634
 

Note!
Orientation view

106
IMG-375636
 
107
IMG-375641
 
108
IMG-377907
 
 

Left hand drive vehicles

109
IMG-378421
 

Note!
Orientation view

110
IMG-378420
 
 

Right-hand drive vehicles

111
IMG-378860
 

Note!
Orientation view

112
IMG-378873
 
 

All vehicles

113
IMG-375601
 
114
IMG-378987
 

Locate the connector.

115
IMG-355819
 

Connect the cable harness.

116
IMG-355821
 

Turn once.

Tear off the excess foam tape.

117
IMG-378988
 

Locate the connector.

118
IMG-375616
 

Connect the cable harness.

119
IMG-375609
 

Turn once.

Tear off the excess foam tape.

120
IMG-375618
 
121
IMG-375619
 
122
IMG-376806
 
123
IMG-376968
 


Use special tool: T9814089, Anti-static strap

124
IMG-376807
 
125
IMG-375626
 

Note!
Note the position.

126
IMG-378815
 

A click confirms that the component is in the correct position.

127
IMG-378293
 
128
IMG-378294
 

Straighten the cable.

Tighten the cable tie.

129
IMG-375627
 
130
IMG-375633
 
 

Installation

131
IMG-375494
 

Connect the prerouted cable.

132
IMG-375496
 

Connect the prerouted cable.

Connect the connectors.

133
IMG-378433
 
134
IMG-378435
 
135
IMG-341801
 
136
IMG-375628
 
137
IMG-376969
 

Remove the tool.

138
IMG-377995
 
139
IMG-377937
 
140
IMG-377934
 
141
IMG-377936
 

Note!
Push the washer upward when tightening.

 

Vehicles with DVD-player

142
IMG-378370
 

Note!
Orientation view

143
IMG-370448
 

Connect the prerouted cable.

 

Vehicles without DVD-player

144
IMG-378371
 

Note!
Orientation view

145
IMG-378373
 

Attach the connector to the wiring harness.

Use: , Electrical tape

The connector is not to be used.

 

All vehicles

146
IMG-370449
 

Connect the prerouted cable.

Connect the connectors.

147
IMG-370450
 
148
IMG-341805
 
 

Accessory installation

149
IMG-378171
 
150
IMG-375417
 
151
IMG-375676
 
152
IMG-375674
 
153
IMG-378164
 

Fold the insulation to one side.

154
IMG-378173
 

Remove the protective film.

155
IMG-378174
 
156
IMG-378166
 

Note that the part's double-sided tape will only be partially attached to the surface.

157
IMG-378165
 

Refit the insulation.

 

Vehicles without rear passenger entertainment system (RSE)

158
IMG-375714
 
159
IMG-375928
 
160
IMG-375724
 
161
IMG-375725
 
 

Vehicles with diesel engines

162
IMG-378221
 
 

Vehicles without rear passenger entertainment system (RSE)

163
IMG-375932
 

Measure and mark as illustrated.

164
IMG-375732
 
165
IMG-375730
 

Deburr the hole edges.

 

Vehicles with rear passenger entertainment system (RSE)

166
IMG-375939
 
167
IMG-375940
 
168
IMG-377008
 
169
IMG-375941
 
170
IMG-375943
 
171
IMG-375944
 
172
IMG-375945
 

Deburr the hole edges.

 

All vehicles

173
IMG-375415
 
174
IMG-375729
 
175
IMG-375201
 

Connect the connectors.

176
IMG-375713
 
177
IMG-376457
 
178
IMG-375731
 
179
 

Reinstall the removed parts in reverse order.

180
IMG-242268
 

Download software (application) for the accessory's function according to the service information in VIDA.

Order and download software according to: 31399194

181
IMG-378985
 

Place the manual for this accessory in a suitable location in the car.

 

Check

182
IMG-375960
 
  1. Turn on the ignition.

  2. Press the button marked "Media".

  3. Choose Sensus Connected Touch in the menu.

  4. Reply YES to the question "DO YOU ALLOW THE GPS POSITIONING DATA TO BE USED?"

  5. The Sensus Connected Touch start menu should show.

  6. Move your finger from right to left over the display. Start from the inner edge of the display.

  7. A new menu should now show.

  8. Turn off the ignition.

 

System check

183
IMG-377070
 

Follow the instructions on www.volvocars.com/sct-update and check if the system is equipped with the latest software. If not, follow the instructions to carry out update.

 

Applies when the customer has chosen map information for navigation

 

Removal

 

Does not apply to vehicles for the Chinese market.

184
IMG-378291
 

The part is not to be reused.

 

Accessory installation

 

Applies to all markets.

185
IMG-378288
 
186
IMG-378292