Information

• Read through all of the instructions before starting installation.

• Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

• Ensure that all tools stated in the instructions are available before starting installation.

• Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

• In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

Color symbols

1. Used for focused component, the component with which you will do something.

2. Used as extra colors when you need to show or differentiate additional parts.

3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

4. Used when the component is not fully removed from the vehicle but only hung to the side.

5. Used for standard tools and special tools.

6. Used as background color for vehicle components.

Removal

Remove the panel.

Remove the panel.

Remove the panel.

Disconnect the connector, if applicable.

Disconnect the connector.

Remove the screws.

Locate the existing connector in the vehicle's cable harness.

Reinstall the screws.

Accessory installation

Connect the connector.

Reinstall the removed parts in reverse order.

Download software (application) for the accessory's function according to the service information in VIDA.

Order and download software according to: 31278413

Calibration

Information is available in VIDA under:

Repair/Cleaning, Inspection and Adjustment/8 Body and interior/88 Interior equipment/882 Interior equipment/Interior equipment/Compass Calibration