2017 L.H.D

Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
S60 Cross Country 2017

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
313460831.031407107, 31350479, 31346554
Towbar, control module (TRM)




Equipment
IMG-242205
IMG-345497
IMG-332314
IMG-239664

IMG-360181


 
  

INTRODUCTION

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 
1
IMG-245980
 

  • Set the ignition key to position 0.


Note!

Wait at least one minute before unplugging the connectors or removing other electrical equipment.


 

Applies to the S60

2
IMG-339894
 

Applies to the S60

3
IMG-340180
 

4
IMG-340028
 

  • Carefully pry off the covers and remove the screws.

5
IMG-339896
 

  • Remove the panel.

6
IMG-340029
 

7
IMG-361427
 

Use: Isopropanol, P/N 1161721

  • Wipe dry.

8
IMG-360218
 

Use: Isopropanol, P/N 1161721

  • Wipe dry.

9
IMG-356181
 

  • Take the two Velcro straps from the kit and press them together edge to edge.

10
IMG-360227
 

  • Remove the protective backing tape from one side of the Velcro straps.

11
IMG-360231
 

When installing Velcro tape the surface must maintain a temperature of at least +20 ° C (68°F).

12
IMG-360236
 

  • Remove the masking tape.

13
IMG-361429
 

When installing Velcro tape the surface must maintain a temperature of at least +20 ° C (68°F).

  • Press the control module into place properly.

14
IMG-361430
 

  • Connect the pre-routed connectors to the control module.

    Found in the connection to the rear fuse holder.

15
IMG-340109
 

  • Remove the cover.

16
IMG-340105
 

  • Fit a 40 A fuse in position F11.

17
IMG-340201
 

18
IMG-339899
 

19
 

  • Reinstall the detached components in reverse order.

20
IMG-242268
 

  • Download the software for the accessory's function following the service information in VIDA.

    See VIDA or the accessories catalogue for software part number.

21
IMG-342225
 

Applies to the V60

22
IMG-342227
 

23
IMG-361456
 

Use: Isopropanol, P/N 1161721

  • Wipe dry.

24
IMG-356179
 

Use: Isopropanol, P/N 1161721

  • Wipe dry.

25
IMG-356181
 

26
IMG-222282
 

27
IMG-241925
 

28
IMG-356351
 

When installing Velcro tape the surface must maintain a temperature of at least +20 ° C (68°F).

29
IMG-356352
 

30
IMG-361461
 

When installing Velcro tape the surface must maintain a temperature of at least +20 ° C (68°F).

  • Press the control module onto the luggage compartment onto the cleaned surface.

31
IMG-342289
 

Applies to cars with model year up to and including -2012

  • Fold up the insulation mat at the front edge on the left-hand side in the cargo compartment.

32
IMG-361448
 

  • Locate the connectors in the car's cable harness.

33
IMG-360183
 

  • Connect the extension cable to the located connector.

34
IMG-360336
 

  • Route the extension cable following the existing cable harness.

    Use cable ties to secure any excess.

35
IMG-361449
 

  • Connect the connectors from the extension wiring to the control module.

36
IMG-361481
 

Applies to cars with model year from and including 2013-

  • Locate the connectors in the car's cable harness.

37
IMG-361483
 

  • Connect the connectors to the control module.

38
IMG-342291
 

Applies to all models

  • Remove the black cover on the fuse holder

39
IMG-342292
 

  • Fit a 40 A fuse in position F11.

40
 

  • Reinstall the detached components in reverse order.

41
IMG-242268
 

  • Download the software for the accessory's function following the service information in VIDA.

    See VIDA or the accessories catalogue for software part number.