Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
V60 Cross Country 2017
V60 Cross Country (-18) 2017

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
314088581.131373092
Parking assistance, front




 

Special tools

 

951 2932 Tension spring

Tool number:951 2932

Tool description:Tension spring

Tool boards:80


Materials

Designation

Part number

Double-sided tape

31299108

Electrical tape


Equipment
IMG-242205
A0000162

IMG-397028

IMG-378261


 
  
36630-2

Parking assistance, front, R-design

 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Color symbols

2
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Removal

3
IMG-332193
 

Set the ignition key to position 0.

4
IMG-340600
 

Remove the panel.

5
IMG-344926
 
6
IMG-344927
 

Remove the weatherstrip.

7
IMG-344928
 
8
IMG-344929
 
9
IMG-344930
 
10
IMG-344451
 
11
IMG-375379
 

Fold the carpet to the side.

12
IMG-396281
 

Locate the rubber grommet under the insulating mat.

13
IMG-396796
 

Fold the insulation to one side.

14
IMG-385185
 

Remove the marked part.

The part is not to be reused.

15
IMG-342372
 

Repeat on the other side.

16
IMG-341902
 

Disconnect the connector, if applicable.

Repeat on the other side.

17
IMG-360124
 
18
IMG-341906
 

Remove the panel.

19
IMG-382077
 

Remove the weatherstrips.

20
IMG-382078
 
21
IMG-382079
 

Detach the panel.

22
IMG-382080
 

Remove the screws.

23
IMG-382081
 

Remove the panel.

24
IMG-382090
 

Remove the panel.

25
IMG-346181
 
26
IMG-343412
 
27
IMG-343413
 
28
IMG-341912
 

Turn the wheel inwards.

29
IMG-395900
 

Remove the screws.

30
IMG-396055
 

Detach the panel.

31
IMG-401530
 

Remove the marked part.

32
IMG-401531
 

Remove the tape.

33
IMG-401532
 

Remove the tape.

34
IMG-401533
 

Use: 31299108, Double-sided tape

 

Vehicles with headlamp washers

35
IMG-341914
 

Fold the wing liner to one side.

36
IMG-341915
 

Warning!
Be prepared to collect escaping fluid.


  1. Note!
    Tape the hose high up on the washer fluid reservoir to prevent washer fluid from coming out.

  2. Take a piece of washer hose. Tie a knot in it and place it on the washer pump to prevent the washer fluid reservoir from emptying.

 

All vehicles

37
IMG-341916
 

Turn the wheel inwards.

38
IMG-395905
 

Remove the screws.

39
IMG-396060
 

Detach the panel.

40
IMG-401373
 

Remove the marked part.

41
IMG-401372
 

Remove the tape.

42
IMG-401371
 

Remove the tape.

43
IMG-401370
 

Use: 31299108, Double-sided tape

44
IMG-341918
 

Fold the wing liner to one side.

45
IMG-378274
 

Locate the connector.

46
IMG-378285
 
  1. Depress the locking device.

  2. Disconnect the connector.

47
IMG-307687
 
48
IMG-307688
 
49
IMG-341924
 
50
IMG-341927
 

Remove the clips.

51
IMG-341931
 

Remove the clips.

Remove the screws.

52
IMG-341932
 
53
IMG-378560
 

Repeat on the other side.

The part is not to be reused.

54
IMG-378108
 

Remove the screws.

55
IMG-378111
 

Remove the clips.

56
IMG-378561
 

Repeat on the other side.

57
IMG-378577
 

Caution!
Place the Bumper Cover on a suitable surface.

58
IMG-378579
 

The part is not to be reused.

 

Accessory installation

59
IMG-378581
 

Repeat on the other side.

60
IMG-378583
 

Repeat on the other side.

61
IMG-378584
 
62
IMG-378590
 
63
IMG-378591
 

Repeat on the other side.

64
IMG-378592
 
65
IMG-378593
 

Connect the connectors.

66
IMG-378598
 

Position/route the cable harness as illustrated.

67
IMG-378596
 

Route the cable harness to the existing cable harness.

68
IMG-378599
 
69
IMG-378601
 

Attach the connector to the wiring harness.

The connector is not to be used.

Repeat on the other side.

70
IMG-378602
 
71
IMG-378603
 
72
IMG-373258
 

Use: , Electrical tape

73
IMG-382238
 
74
IMG-382240
 
75
IMG-378609
 

Place the Bumper Cover in position for installation.

76
IMG-378276
 

Connect the connectors.

 

Vehicles with headlamp washers

77
IMG-350323
 

Reinstall the removed parts in reverse order.

 

All vehicles

78
IMG-378609
 

Reinstall the bumper.

79
IMG-385294
 
80
IMG-385291
 
81
IMG-385299
 

Caution!
Make sure to locate the wiring in such a way that any damage caused by heat or excessive wear is avoided.

Route the cable harness to the existing cable harness.

Reinstall the headlamp.

82
IMG-396167
 

Remove the nuts.

83
IMG-382372
 


Use special tool: T9512932, Tension spring

84
IMG-396188
 

Fold the insulation to one side.


Use special tool: T9512932, Tension spring

85
IMG-396182
 

Install the cable.

Use: , Electrical tape

86
IMG-396190
 
87
IMG-396236
 
88
IMG-396259
 

Install the cable.

89
IMG-377070
 

Raise the car.

90
IMG-396261
 

Note!
Orientation view


Note!
On some markets the rubber grommet may be covered by the heat shield.

91
IMG-396263
 

Pull the wiring through.

Remove the tape.

Remove the Special Tool.

92
IMG-372722
 
93
IMG-377675
 

Pull the wiring through.

94
IMG-373255
 
95
IMG-373254
 
96
IMG-396268
 

Insert the cable in to the passenger compartment, adjust the cable length out into the engine compartment and secure the rubber grommet.

97
IMG-377070
 

Lower the car.

98
IMG-375379
 

Fold the carpet to the side.

99
IMG-396275
 
100
IMG-396277
 
101
IMG-308084
 
102
IMG-346331
 
103
IMG-361341
 

Connect the cable harness terminals in the connector as follows.

104
IMG-361376
 
105
IMG-361377
 
106
IMG-378052
 

Disconnect the connector, if applicable.

Attach the connector to the wiring harness.

Use: , Electrical tape

The connector is not to be used.

107
IMG-378055
 

Disconnect the connectors.

108
IMG-378062
 

The part is not to be reused.

109
IMG-378063
 

Install component that comes with the accessory kit.

110
IMG-378065
 

Connect the connectors.

111
IMG-378066
 

Connect the prerouted cable.

112
IMG-378070
 

Note!
Extra cable length must be secured using cable ties.

113
IMG-242268
 

Download software (application) for the accessory's function according to the service information in VIDA.

Order and download software according to: 31266964

114
IMG-377070
 

Reinstall the removed parts in reverse order.