Information

• Read through all of the instructions before starting installation.

• Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

• Ensure that all tools stated in the instructions are available before starting installation.

• Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

• In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

Further information

When installing, the car must retain a temperature of 20 degrees C.

There may be parts in the accessories kit that are not needed for this installation.

Vehicles with integrated Exhaust End Pipes

Removal

Remove the screws.

Remove the clips.

Detach the panel.

On both sides.

Use: Interior trim remover

Vehicles with parking assistance

The part is to be reused.

All vehicles

Remove the panel.

Remove the screws.

On both sides.

Remove the part carefully

Accessory installation

Install component that comes with the accessory kit.

On both sides.

Install the screws.

On both sides.

Reinstall the removed parts in reverse order.

Applies to vehicles with double end pipe

Install component that comes with the accessory kit.

On both sides.

Install the screws.

On both sides.

Applies to vehicles with single end pipe

Install component that comes with the accessory kit.

On both sides.

Install the screws.

On both sides.