Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
S60 2014
S60 (11-18) 2014

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
313593581.131359362, 31359359, 31373464, 31338929, 31338931, 31338930, 31373462, 31359364
Skid plate, front bumper




IMG-374908




 

Materials

Designation

Part number

Isopropanol

1161721


Equipment
IMG-345497

IMG-374925


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Color symbols

2
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Further information

3
 

When installing, the car must retain a temperature of 20 degrees C.

After installation, the car must not be washed for 48 hours

 

Applies to unpainted component

4
IMG-377423
 
5
IMG-377422
 

Caution!
First the paint must dry after painting.

Clean the surface.

Use: 1161721, Isopropanol

6
IMG-377419
 

Remove the protective film.

7
IMG-377424
 

Install component that comes with the accessory kit.

 

Removal

8
IMG-374940
 

Remove the screws.

 

Accessory installation

9
IMG-374941
 

Use: 1161721, Isopropanol

10
IMG-375481
 

Fold the protective film forward

11
IMG-374942
 
12
IMG-375481
 

Remove the protective film.


Hint
Press and apply pressure to the part over the tape for at least 20 seconds.

13
IMG-375483