Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
S60 2018
S60 (11-18) 2018

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
313389321.131373768, 31408989, 31373462, 31373492, 31373493, 31373494, 31338931, 31338930, 31338929
Side scuff plate




 

Materials

Designation

Part number

Isopropanol

1161721


Equipment
IMG-345497
IMG-244945
IMG-239940
IMG-239660

IMG-377501


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Conditions

2
 

When installing, the car must retain a temperature of 20 degrees C.

After installation, the car must not be washed for 48 hours

After installation, the car must not be driven for 2 hours

 

Color symbols

3
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Applies to unpainted component

4
IMG-377438
 
5
IMG-377442
 

Caution!
First the paint must dry after painting.

Clean the surface.

Use: 1161721, Isopropanol

6
IMG-377445
 

Remove the protective film.

7
IMG-377446
 

Install component that comes with the accessory kit.

 

All vehicles

 

Accessory installation

8
IMG-340411
 

Clean the surface.

Allow to dry.

9
IMG-355879
 

Remove the protective film.

10
IMG-355880
 

Remove the protective film.

11
IMG-374598
 
12
IMG-374452
 
13
IMG-374455
 

Drill the holes.

14
IMG-374453
 
15
IMG-374454
 
16
IMG-374456
 

Drill the holes.

17
IMG-374459
 
18
IMG-374457
 
19
IMG-376798
 

Fold the protective film forward

20
IMG-376972
 

Clean the surface.

Use: 1161721, Isopropanol

21
IMG-374471
 
22
IMG-374473
 
23
IMG-374476
 
24
IMG-376811
 

Caution!
Pull carefully.

Remove the protective film.

Use: Interior trim remover


Hint
Press and apply pressure to the part over the tape for at least 20 seconds.

25
 

Repeat all method steps for the other side.