Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
S60 2018
S60 (11-18) 2018

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
314082491.031373092
Parking assistance, front




 

Materials

Designation

Part number

Electrical tape


Equipment
IMG-242205
A0000162

IMG-378025

IMG-378261


 
  
36630-2

Parking assistance, front, R-design

 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Further information

2
 

These installation instructions show installation on left hand drive cars.

When installing on right-hand drive cars, perform the procedures on the opposite side and/or mirrored.

Where the procedure differs, the right-hand version is also shown with text and image.

 

Color symbols

3
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Removal

4
IMG-332193
 

Set the ignition key to position 0.

5
IMG-340600
 

Remove the panel.

6
IMG-344926
 
7
IMG-344927
 

Remove the weatherstrip.

8
IMG-344928
 
9
IMG-344929
 
10
IMG-344930
 
11
IMG-344451
 
12
IMG-269484
 

Fold the carpet to the side.

13
IMG-307603
 

Locate the rubber grommet under the insulation and press it out.

14
IMG-342372
 

Repeat on the other side.

15
IMG-341902
 

Disconnect the connector, if applicable.

Repeat on the other side.

16
IMG-360124
 
17
IMG-341906
 

Remove the panel.

18
IMG-307605
 

Remove the weatherstrips.

19
IMG-307606
 

Detach the panel.

20
IMG-307607
 

Detach the panel.

21
IMG-341907
 
22
IMG-341908
 

Remove the nuts.

23
IMG-341910
 

Remove the clips.

24
IMG-341909
 

Remove the panel.

25
IMG-341912
 

Turn the wheel inwards.

26
IMG-341913
 

Remove the screws.

 

Vehicles with headlamp washers

27
IMG-341914
 

Fold the wing liner to one side.

28
IMG-341915
 

Warning!
Be prepared to collect escaping fluid.


  1. Note!
    Tape the hose high up on the washer fluid reservoir to prevent washer fluid from coming out.

  2. Take a piece of washer hose. Tie a knot in it and place it on the washer pump to prevent the washer fluid reservoir from emptying.

 

All vehicles

29
IMG-341916
 

Turn the wheel inwards.

30
IMG-341917
 

Remove the screws.

31
IMG-341918
 

Fold the wing liner to one side.

32
IMG-378274
 

Locate the connector.

33
IMG-378285
 
  1. Depress the locking device.

  2. Disconnect the connector.

34
IMG-307687
 

RHD: The procedure is carried out on the opposite side.

35
IMG-307688
 

RHD: The procedure is carried out on the opposite side.

36
IMG-341924
 
37
IMG-341927
 

Remove the clips.

38
IMG-341931
 

Remove the clips.

Remove the screws.

39
IMG-341932
 
40
IMG-378560
 

Repeat on the other side.

The part is not to be reused.

41
IMG-378108
 

Remove the screws.

42
IMG-378111
 

Remove the clips.

43
IMG-378561
 

Repeat on the other side.

44
IMG-378577
 

Caution!
Place the Bumper Cover on a suitable surface.

45
IMG-378579
 

The part is not to be reused.

 

Accessory installation

46
IMG-378581
 

Repeat on the other side.

47
IMG-378583
 

Repeat on the other side.

48
IMG-378584
 
49
IMG-378590
 
50
IMG-378591
 

Repeat on the other side.

51
IMG-378592
 

RHD: The cable harness is positioned mirrored.

52
IMG-378593
 

Connect the connectors.

53
IMG-378598
 
54
IMG-378596
 
55
IMG-378599
 
56
IMG-378601
 

Attach the connector to the wiring harness.

The connector is not to be used.

Repeat on the other side.

57
IMG-378602
 
58
IMG-378603
 
 

Left hand drive vehicles

59
IMG-373258
 

Use: , Electrical tape

60
IMG-378253
 
61
IMG-307882
 
 

Right-hand drive vehicles

62
IMG-373258
 

Use: , Electrical tape

63
IMG-341962
 
64
IMG-341963
 
 

All vehicles

65
IMG-378609
 

Place the Bumper Cover in position for installation.

 

Left hand drive vehicles

66
IMG-378276
 

Connect the connectors.

 

Right-hand drive vehicles

67
IMG-378280
 

Connect the connector.

68
IMG-378611
 

Connect the connector.

 

Vehicles with headlamp washers

69
IMG-350323
 

Reinstall the removed parts in reverse order.

 

All vehicles

70
IMG-378609
 

Reinstall the bumper.

 

Left hand drive vehicles

71
IMG-307909
 

Caution!
Make sure to locate the wiring in such a way that any damage caused by heat or excessive wear is avoided.

Route the cable harness to the existing cable harness.

Reinstall the headlamp.

72
IMG-273585
 
73
IMG-273586
 

Remove the nuts.

74
IMG-378517
 
75
IMG-378516
 

Pull the wiring through.

76
IMG-273588
 

Install the cable.

 

Right-hand drive vehicles

77
IMG-273585
 
78
IMG-307910
 
79
IMG-307911
 

Install the cable.

80
IMG-307912
 

Caution!
Make sure to locate the wiring in such a way that any damage caused by heat or excessive wear is avoided.

81
IMG-307913
 
82
IMG-307914
 
 

All vehicles

83
IMG-345879
 

Note!
Orientation view


Note!
On some markets the rubber grommet may be covered by the heat shield.

84
IMG-372722
 
85
IMG-373255
 
86
IMG-377675
 

Pull the wiring through.

87
IMG-373254
 
88
IMG-340544
 

Insert the cable in to the passenger compartment, adjust the cable length out into the engine compartment and secure the rubber grommet.

89
IMG-377674
 
 

Right-hand drive vehicles

90
IMG-308083
 
 

All vehicles

91
IMG-378628
 
92
IMG-341976
 
 

Left hand drive vehicles

93
IMG-361341
 

Connect the cable harness terminals in the connector as follows.

 

Right-hand drive vehicles

94
IMG-361342
 

Connect the cable harness terminals in the connector as follows.

 

All vehicles

95
IMG-361376
 
96
IMG-361377
 
97
IMG-378621
 

Disconnect the connector, if applicable.

Attach the connector to the wiring harness.

Use: , Electrical tape

The connector is not to be used.

98
IMG-378620
 

Disconnect the connectors.

99
IMG-378617
 

The part is not to be reused.

100
IMG-378616
 

Install component that comes with the accessory kit.

101
IMG-378619
 

Connect the connectors.

102
IMG-378618
 

Connect the prerouted cable.

103
IMG-378630
 

Note!
Extra cable length must be secured using cable ties.

104
IMG-242268
 

Download software (application) for the accessory's function according to the service information in VIDA.

Order and download software according to: 31266964

105
IMG-377070
 

Reinstall the removed parts in reverse order.