Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
V40 Cross Country 2015

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
312889081.431414903, 31407107, 31350479, 31288971, 31288762
Towbar, wiring, and control module




 

Materials

Designation

Part number

Isopropanol

1161721


Equipment
IMG-242205
IMG-345497
IMG-239664
IMG-239667

IMG-355532

IMG-355533


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Color symbols

2
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Removal

3
IMG-355927
 
4
IMG-355932
 
5
IMG-372962
 

Note!
Orientation view

6
IMG-372961
 

Remove the panel.

7
IMG-368833
 
8
IMG-360944
 

Repeat on the other side.

9
IMG-360951
 
10
IMG-355945
 
11
IMG-355946
 

Remove the screws.

12
IMG-356006
 

Remove the panel.

13
IMG-373665
 

Detach the panel.

14
IMG-373664
 

Disconnect the connector.

15
IMG-355942
 

Remove the panel.

16
IMG-356008
 

Remove the panel.

17
IMG-356009
 

Disconnect the connector, if applicable.

18
IMG-356007
 

Remove the panel.

19
IMG-356016
 

The part is not to be reused.

20
IMG-362193
 

Release the lock.

21
IMG-362194
 

Remove the clips.

 

Accessory installation

22
IMG-356021
 
23
IMG-356026
 

Pull the wiring through.

24
IMG-356030
 
25
IMG-340668
 

Caution!
Make sure that the rubber grommet seals properly to the body.

26
IMG-356033
 

Install the screws.

Install the nuts

27
IMG-356034
 
28
IMG-362196
 
29
IMG-362197
 
30
IMG-362198
 

Install the screw.


Tightening torque: M6 , 10 Nm

31
IMG-362242
 

Attach any excess wire to the wiring harness.

32
IMG-356361
 
33
IMG-356178
 

Use: 1161721, Isopropanol

34
IMG-356179
 

Use: 1161721, Isopropanol

35
IMG-356181
 
36
IMG-222282
 
37
IMG-241925
 
38
IMG-356351
 

When installing Velcro tape the surface must maintain a temperature of at least +20 ° C (68°F).

39
IMG-356352
 
40
IMG-356356
 

When installing Velcro tape the surface must maintain a temperature of at least +20 ° C (68°F).

41
IMG-356358
 

Connect the connector.

42
IMG-356359
 

Locate the pre-routed connectors.

Connect the connectors.

43
IMG-356526
 
44
IMG-356597
 

Note!
Orientation view

45
IMG-356582
 

Release the lock.

46
IMG-366013
 
47
IMG-356598
 
48
IMG-356646
 

This step only concerns connecting permanent 12V feed to trailer.

49
IMG-356601
 
50
IMG-242268
 

Download software (application) for the accessory's function according to the service information in VIDA. See VIDA or the accessories catalogue for software part number.

 

Check

51
IMG-348017
 

Note!
To activate the trailer module (TRM) at least two light sources (lamps) must be connected. This can be done by connecting test equipment for the trailer connector, or a trailer.

  1. Left indicator lamp

  2. Fog tail lamps.

  3. Ground connection

  4. Right indicator lamp

  5. Right position lamp

  6. Brake light

  7. Left position lamp

  8. Back-up lamp

  9. Battery voltage, constant

  10. Battery voltage, ignition on

  11. Ground connection

  12. Not connected

  13. Ground connection