Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
S80 2015
S80 (07-) 2015 R.H.D

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
314145781.031339994
Parking assistance, camera, front. For Sensus Connect.




IMG-373506




 

Special tools

 

951 2932 Tension spring

Tool number:951 2932

Tool description:Tension spring

Tool boards:80


Materials

Designation

Part number

Low temperature grease

1161427


Equipment
IMG-242205
IMG-345497
IMG-300203
IMG-327738
IMG-239667
IMG-244945
IMG-240693

IMG-380823


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Conditions

2
IMG-332179
 

Set the ignition key to position 0.

Remove the battery's negative cable.

 

Color symbols

3
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Removal

4
IMG-340604
 
5
IMG-376333
 

Remove the panel.

6
IMG-376334
 

Remove the panel.

7
IMG-376348
 

Remove the weatherstrip.

8
IMG-376350
 

Remove the panel.

9
IMG-376352
 
10
IMG-354320
 
11
IMG-349804
 

Remove the panel.

12
IMG-349806
 

Remove the screws.

13
IMG-345282
 

Remove the screws.

 

Cars with manual transmissions

14
IMG-345747
 

Release the catch which is located inside the gear lever boot.

15
IMG-347222
 
 

Cars with automatic transmissions

16
IMG-345283
 
17
IMG-345284
 

Release the shift-lock function.

Move the gear lever to D.

 

All vehicles

18
IMG-341878
 

Remove the panel.

19
IMG-346036
 

Remove the panel.

20
IMG-340599
 
  1. Fold the carpet to the side.

  2. Unhook the clip(s).

  3. Disconnect the connector.

21
IMG-350000
 
22
IMG-349811
 

Remove the screws.

23
IMG-347139
 

Remove the panel.

 

Vehicles with the 4C system.

24
IMG-345317
 

Disconnect the connector.

 

All vehicles

25
IMG-376353
 

Caution!
Be careful not to damage the catches.

Remove the panel.

26
IMG-340605
 

Remove the screws.

27
IMG-345296
 

Detach the panel.

28
IMG-380815
 
 

Accessory installation

29
IMG-380819
 
30
IMG-380816
 
 

Removal

31
IMG-349942
 

Remove the screws.

32
IMG-349946
 
33
IMG-380933
 

Caution!
The number of connectors can vary depending on the vehicle's equipment level.

Disconnect the connectors.

34
IMG-353512
 
35
IMG-353511
 

Remove the screws.

36
IMG-349993
 

Remove the panel.

37
IMG-350006
 

Remove the panel.

38
IMG-352301
 

Remove the screws.

On both sides.

39
IMG-352271
 

Remove the panel.

40
IMG-350026
 

Remove the screws.

41
IMG-349999
 

Detach the panel.

42
IMG-349992
 

Disconnect the connector.

 

Accessory installation

43
IMG-350072
 
44
IMG-355161
 

Caution!
Make sure that no part of the wiring harness is trapped.

Facilitate cable routing by temporarily raising the floor bracket using a socket or similar.

Pull the wiring through.

45
IMG-355174
 

Connect the connectors.

46
IMG-355175
 

Tear off the excess foam tape.

47
IMG-355200
 

Route the cable harness to the existing cable harness.

48
IMG-376366
 

Route the cable harness to the existing cable harness.

Pull the wiring through.

Install the cable.

49
IMG-381583
 
50
IMG-380941
 

Connect the prerouted cable.

 

Installation

51
IMG-380943
 

Connect the connectors.

52
IMG-349948
 
53
IMG-349942
 

Install the screws.

 

Removal

54
IMG-340541
 

Fold the carpet to the side.

Locate the rubber grommet under the insulation and press it out.

 

Accessory installation

55
IMG-376368
 

Note!
Do not yet tighten the clamps.

Route the cable harness to the existing cable harness.

56
IMG-376369
 

Pull the wiring through.

 

Removal

57
IMG-345877
 

Remove the screws.

Remove the clips.

58
IMG-345878
 
59
IMG-340542
 

Note!
On some markets the rubber grommet may be covered by the heat shield.

 

Accessory installation

60
IMG-345881
 
61
IMG-353681
 

Caution!
Take extra care when handling the component.

Use: 1161427, Low temperature grease

62
IMG-340954
 

Pull the wiring through.

63
IMG-340738
 


Use special tool: T9512932, Tension spring

Pull the wiring through.

64
IMG-340535
 

Note!
Do not yet tighten the clamps.

65
IMG-340747
 

Note!
Do not yet tighten the clamps.

 

Removal

66
IMG-373507
 
67
IMG-376394
 
  1. Release the catches.

  2. Remove the part carefully

68
IMG-353381
 

Disconnect the connector.

69
IMG-373509
 
 

Accessory installation

70
IMG-376395
 
71
IMG-376423
 

Caution!
Tighten clamps properly.

 

Removal

72
IMG-373510
 

Note!
Orientation view

73
IMG-373511
 

Locate relevant marking.

 

Accessory installation

74
IMG-373512
 
75
IMG-347781
 
76
IMG-347786
 
77
IMG-373513
 
78
IMG-373514
 
79
IMG-373515
 

Connect the connector.

80
 

Reinstall the removed parts in reverse order.

81
IMG-336901
 

Reinstall the battery's negative cable.

82
IMG-242268
 

Download software (application) for the accessory's function according to the service information in VIDA.

Order and download software according to: 31288598