Information

• Read through all of the instructions before starting installation.

• Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

• Ensure that all tools stated in the instructions are available before starting installation.

• Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

• In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

Further information

When installing, the car must retain a temperature of 20 degrees C.

Color symbols

1. Used for focused component, the component with which you will do something.

2. Used as extra colors when you need to show or differentiate additional parts.

3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

4. Used when the component is not fully removed from the vehicle but only hung to the side.

5. Used for standard tools and special tools.

6. Used when the component is not fully removed from the vehicle but only hung to the side.

Applies to unpainted component

Clean the surface.

Use: 1161721, Isopropanol

Remove the protective film.

Install component that comes with the accessory kit.

All vehicles

Removal

Remove the screws.

Remove the panel.

Accessory installation

Remove the protective film.

Drill the holes.

Install the clips as illustrated.

Fold the protective film forward

Install the screws.

Note position of components.