Information

• Read through all of the instructions before starting installation.

• Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

• Ensure that all tools stated in the instructions are available before starting installation.

• Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

• In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

Color symbols

1. Used for focused component, the component with which you will do something.

2. Used as extra colors when you need to show or differentiate additional parts.

3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

4. Used when the component is not fully removed from the vehicle but only hung to the side.

5. Used for standard tools and special tools.

6. Used as background color for vehicle components.

Set the ignition key to position 0.

Removal

Remove the marked part.

Vehicles with subwoofer speaker

Disconnect the connector.

Remove the nuts.

Remove the screws.

Remove the marked part.

Accessory installation

Install component that comes with the accessory kit.

Install component that comes with the accessory kit.

Install the screws.

Tighten the screw.

Tightening torque: M6 , 10 Nm

Install component that comes with the accessory kit.

Fasten the wiring harness using the existing clips.

Locate the pre-routed connectors.

Connect the connectors.

Vehicles with subwoofer speaker

Reinstall the removed parts in reverse order.

Reinstall the screws.

Tightening torque: M6 , 10 Nm

Install the nuts

Connect the connector.

All vehicles

Carry out a download, or a re-load, of accessory function software by following VIDA service information.