取り付けインストラクション

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
XC60 2016
XC60 (-17) 2016

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
313460821.031407107, 31346554, 31350479
Towbar, control module TRM




 
Equipment
IMG-242205
IMG-345497
IMG-332314

IMG-360181


 
  

INTRODUCTION

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 
1
IMG-245980
 

  • Turn the ignition key to position 0.


Note!

Wait at least one minute before unplugging the connectors or removing other electrical equipment.


2
IMG-346921
 

3
IMG-346811
 

4
IMG-360187
 

5
IMG-362267
 

Use: Isopropanol, P/N 116172

  • Wipe dry.

6
IMG-356179
 

Use: Isopropanol, P/N 1161721

  • Wipe dry.

7
IMG-356181
 

8
IMG-222282
 

9
IMG-241925
 

10
IMG-356351
 

When installing Velcro tape the surface must maintain a temperature of at least +20 ° C (68°F).

11
IMG-356352
 

12
IMG-362292
 

  • Press the control module into place.

    When installing Velcro tape the surface must maintain a temperature of at least +20 ° C (68°F).

13
IMG-362298
 

Applies to cars with model year from and including 2013-

  • Locate the connectors in the car's wiring harness.

14
IMG-362296
 

  • Connect the located connectors.

15
IMG-347027
 

Applies to cars with model year up to and including -2012

  • Fold aside the insulation.

16
IMG-362307
 

  • Locate the connectors.

17
IMG-360183
 

  • Connect the extension cable to the located connector.

18
IMG-362318
 

  • Route the extension cable following the existing cable harness.

19
IMG-362319
 

  • Route the extension cable following the existing cable harness.

    Use cable ties to secure any excess.

20
IMG-359922
 

  • Connect the connectors from the extension wiring to the control module.

21
IMG-360189
 

Applies to all models

  • Press in the catches on the black cover on the fuse holder and remove it.

22
IMG-285841
 

  • Install the 40A fuse in position FA 11 in module RJB-A.

  • Reinstall the cover.

23
 

  • Reinstall the detached components in reverse order.

24
IMG-242268
 

  • Download the software (application) for the accessory's function following the service information in VIDA.

    See VIDA or the accessories catalogue for software part number.