Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
S60 2013
S60 (11-18) 2013

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
322709061.132270865
Digital radio, DAB




 

Special tools

 

951 2620 Stripping tool (for wiring)

Tool number:951 2620

Tool description:Stripping tool (for wiring)

Tool boards:39

 

951 2785 Crimping tool (included in 9512669)

Tool number:951 2785

Tool description:Crimping tool (included in 9512669)

Tool boards:39

 

951 2777 Hot-air gun

Tool number:951 2777

Tool description:Hot-air gun

Tool boards:08



IMG-460759

IMG-462354


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Further information

2
IMG-400004
 

Caution!
Attach the antenna wires using tape. Cable ties or similar must not be used.


Caution!
Make sure that the fiber optic cables are not bent to a radius of less than 25 mm.

 

Color symbols

3
IMG-400010
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

  7. Used for accessory components.

 

Removal

4
IMG-342372
 

Repeat on the other side.

5
IMG-360124
 

Remove the marked part.

Disconnect any connector(s).

6
IMG-462480
 
7
IMG-400820
 

Loosen the marked detail.

Repeat on the other side.

8
IMG-400821
 

Loosen the marked detail.

Repeat on the other side.

9
IMG-462583
 

Remove the marked part.

Repeat on the other side.

10
IMG-341906
 

Remove the marked part.

11
IMG-461556
 

Detach the panel.

Fold the carpet aside.

12
IMG-462565
 
13
IMG-462566
 
14
IMG-344926
 

Remove the panel.

Disconnect the connector, if applicable.

15
IMG-344927
 

Remove the weatherstrip.

16
IMG-344928
 

Caution!
The front and upper sill panel must be removed and installed as one unit.

17
IMG-344929
 
18
IMG-344930
 
19
IMG-340979
 
20
IMG-340980
 

Remove the screws.


Tightening torque: Front seat to body , 40 Nm

21
IMG-303005
 
22
IMG-303006
 

Remove the screws.


Tightening torque: Front seat to body , 40 Nm

23
IMG-400002
 

Remove the battery's negative cable.

 

Alternative 1

24
IMG-380657
 
 

Alternative 2

25
IMG-380655
 
26
IMG-380656
 
 

All vehicles

27
IMG-329151
 
28
IMG-373198
 

Note!
Orientation view

29
IMG-329209
 

Loosen the screws.

Disconnect the connector.

30
IMG-382639
 

Disconnect the connector, if applicable.

31
IMG-329153
 

Caution!
Be extra careful when removing or installing this component.

32
IMG-460418
 

Remove the screws.

Loosen the marked detail.

 

Vehicles with High Performance Sound

33
IMG-460425
 

Disconnect the connector.

 

Vehicles with Premium Sound

34
IMG-460422
 

Disconnect the connector.

 

All vehicles

35
IMG-460609
 

Note!
Orientation view

 

Accessory installation

36
IMG-460610
 

Loosen the tape temporarily.

The item is to be reused.

37
IMG-460611
 
38
IMG-460426
 


Use special tool: T9512620, Stripping tool (for wiring)

39
IMG-460764
 

Use detail according to image.

40
IMG-460428
 


Use special tool: T9512620, Stripping tool (for wiring)

41
IMG-460373
 
42
IMG-460547
 


Use special tool: T9512785, Crimping tool (included in 9512669)

43
IMG-460375
 

Caution!
Make sure that the surrounding components are protected from heat.


Use special tool: T9512777, Hot-air gun

44
IMG-460376
 
45
IMG-460660
 
46
IMG-460520
 

Connect the connectors.

47
IMG-461499
 

Fold the carpet aside.

48
IMG-461501
 

Remove the screw.

49
IMG-461502
 

Connect the ground cable.

Reinstall the screw.

50
IMG-461503
 

Route the cable harness to the existing cable harness.

Install the wiring harness.

Use a cable tie

51
IMG-461506
 

Route the cable harness to the existing cable harness.

Install the wiring harness.

Use a cable tie

52
IMG-461500
 

Fold the floor carpet back.

53
IMG-460843
 

Caution!
Make sure that the fiber optic cables are not bent to a radius of less than 25 mm.

Place the overlap of the cable mat under the amplifier.

Reinstall the removed part.

Reinstall the screws.


Tightening torque: M6 , 10 Nm

54
IMG-460480
 

Assemble components that come with the accessory kit.

55
IMG-460484
 

Install component that comes with the accessory kit.

56
IMG-462369
 

Note!
Orientation view

57
IMG-462341
 
58
IMG-462346
 
59
IMG-462576
 

Install component that comes with the accessory kit.

60
IMG-461567
 

Fold the insulation aside.

61
IMG-461509
 

Route the cable harness to the existing cable harness.

Install the wiring harness.

Use a cable tie

62
IMG-461519
 

Connect the connectors.

 

Removal

63
IMG-462617
 

Remove the marked part.

64
IMG-462618
 

Remove the screw.

65
IMG-462621
 

Note!
The graphic shows the back of the component before removal.

66
IMG-462622
 

Remove the panel.

67
IMG-462607
 

Disconnect the connectors.

Remove the screw.

Remove the marked part.

 

Accessory installation

68
IMG-462626
 

Install component that comes with the accessory kit.


Tightening torque: M6 , 10 Nm

69
IMG-462637
 

Connect the connector.

70
IMG-460766
 

Use details according to image.

71
IMG-460546
 

Assemble components that come with the accessory kit.

Depress the secondary lock.

72
IMG-462639
 

Connect the connector.

Install component that comes with the accessory kit.

73
IMG-462659
 

Caution!
Attach the antenna wires using tape. Cable ties or similar must not be used.

Route the wire adjacent to existing wirings.

Install the cable.

Use tape

74
IMG-462660
 

Route the wire adjacent to existing wirings.

Install the cable.

Use tape

75
IMG-462653
 

Fold the insulation aside.

76
IMG-462657
 

Route the wire adjacent to existing wirings.

Install the cable.

Use tape

77
IMG-462667
 

Route the wire adjacent to existing wirings.

Install the cable.

Use tape

78
IMG-462671
 

Pull the wiring harness through.

Connect the connector.

Install the cable.

Use tape

79
 

Reinstall the removed parts in reverse order.

80
IMG-400003
 

Reinstall the battery's negative cable.

81
IMG-400006
 

Order and download software according to VIDA/SOFTWARE.

Order and download software according to: 31268617

Download software (application) for the accessory's function according to the service information in VIDA.

Order and download software according to: 31285168