Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
V40 Cross Country 2016
D4204T9, B4204T21, D4204T8, B4204T11, B4154T4, B4204T19, D4204T14, B4204T15, B4204T37

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
314144891.031414024
Electric engine heater, passenger compartment connector




 

Materials

Designation

Part number

Low temperature grease

1161427


Equipment
IMG-345497
IMG-239664
IMG-239660
IMG-300203
IMG-239980
IMG-317443

IMG-371788


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

2
 

There may be parts in the accessories kit that are not needed for this installation.

 

Color symbols

3
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Removal

4
IMG-332193
 

Set the ignition key to position 0.

5
IMG-356946
 

Remove the panel.

6
IMG-356947
 

Disconnect the connector.

7
IMG-358478
 
8
IMG-358482
 
9
IMG-358485
 

Fold the carpet to the side.

10
IMG-373263
 

Locate the rubber grommet under the insulating mat.

11
IMG-373265
 

Make a cut in the insulation.

12
IMG-373262
 

Fold the insulation to one side.

13
IMG-373264
 
14
IMG-358506
 

Raise the car.

  1. Remove the clips.

  2. Remove the screws.

15
IMG-358531
 
16
IMG-373338
 

Note!
Orientation view

17
IMG-384048
 

The part is not to be reused.

18
IMG-384045
 

Loosen the clip.

Disconnect the connector.

 

Accessory installation

19
IMG-362914
 

Caution!
No grease on contact surfaces.

Use: 1161427, Low temperature grease

20
IMG-384050
 

Install the catch.

21
IMG-370181
 

Caution!
No grease on contact surfaces.

Use: 1161427, Low temperature grease

22
IMG-384052
 

Install the clip(s).

23
IMG-384060
 

Tighten the cable ties.

24
IMG-370222
 
25
IMG-370243
 
26
IMG-373274
 

Make a cut in the insulation.

27
IMG-373284
 

Fold the insulation to one side.

28
IMG-384029
 

Caution!
Make sure to locate the wiring in such a way that any damage caused by heat or excessive wear is avoided.

Insert the cable in to the passenger compartment, adjust the cable length out into the engine compartment and secure the rubber grommet.

29
IMG-373356
 
30
IMG-362914
 

Caution!
No grease on contact surfaces.

Use: 1161427, Low temperature grease

31
IMG-370220
 
32
IMG-370221
 

Install the catch.

33
IMG-362686
 

Fold the insulation to one side.

 

Vehicles with Child seat mounting eyelets

34
IMG-374797
 

Remove the screw.

35
IMG-388214
 

Install the screw.

 

All vehicles

36
IMG-388215
 

Install the screw.

37
IMG-371338
 

Refit the insulation.

38
IMG-371306
 

Make a cut in the insulation.

39
IMG-371379
 

Fold the floor carpet back.

40
IMG-371433
 

Make a cut in the mat.

41
IMG-371462
 

Fold the carpet back towards the bracket.

Install the screws.

42
IMG-377070
 

Reinstall the removed parts in reverse order.