Workshop installation recommended
Op. No.: 84136
An exclusive and stylish running board that enhances the car's luxurious look. "Integrated running board with illumination" makes it easy to enter and exit the car and to load the car's roof. It has LED illuminated strips on its outer edge which show where to place your foot, and which give the car a cool appearance. The lighting is coordinated with the car's interior light logic1.
The running board is mainly made of strong aluminium for the lowest possible weight and high strength, which can withstand 300 kg. The surface of the running board consists of stainless steel and everything is framed by an exterior colour-matched plastic panel. To reduce the risk of slipping on the running board, rubber anti-slip protection is integrated in the metal section. The running board replaces the car's standard fitted sill mouldings.
|39793321||001, Primed||Installation Instruction|
|39793441||Magic Blue, 467||Installation Instruction|
|39793346||Electric Silver, 477||Installation Instruction|
|31664875||Ember Black, 487||Installation Instruction|
|39793351||Savile Grey, 492||Installation Instruction|
|39793336||Passion Red, 612||Installation Instruction|
|39793341||Ice White, 614||Installation Instruction|
|39793435||Crystal White Pearl, 707||Installation Instruction|
|39793361||Bright Silver Metallic, 711||Installation Instruction|
|39793366||Osmium Grey, 714||Installation Instruction|
|39793371||Onyx Black, 717||Installation Instruction|
|39793326||Luminous Sand, 719||Installation Instruction|
|39793331||Bursting Blue, 720||Installation Instruction|
|39793376||Maple Brown, 722||Installation Instruction|
|39793381||Denim Blue, 723||Installation Instruction|
|39793386||Pine Grey, 724||Installation Instruction|
|39795871||Birch light, 726||Installation Instruction|
|39795880||Pebble Grey, 727||Installation Instruction|
|39795889||Thunder Grey, 728|
Facts and advantages
Withstands loads up to 300 kg.
Complete kit, both right and left.
Aluminium, steel and plastic
Cannot be combined with Exterior styling 1-4.
If the car is ordered from the factory with option code (999) for "Integrated running board with illumination", the enclosed wiring does not need to be used as it is already installed. Option code (999) is standard in certain markets and this wiring does not need to be used.
For the best finish over time, we recommend that all metal parts are cleaned and waxed on a regular basis. This is particularly important during winter due to the effects of road salt. To clean and maintain plastic parts, a special cleaning agent is recommended, which is available at your local Volvo dealer.
In cases where a colour is missing, a base coated kit must be ordered and post painted in the desired colour.
- The lighting is only activated when the car is stationary.
- Ordered according to separate procedures and downloaded using VIDA.