| | |
| | Read through all of the instructions before starting installation. Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation. Ensure that all tools stated in the instructions are available before starting installation. Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps. In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.
|
| | |
| | IMG-400007 |
|
| | When installing, the car must retain a temperature of 20 degrees C. |
| | |
| | IMG-400010 |
|
| | Note! This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps. |
Used for focused component, the component with which you will do something. Used as extra colors when you need to show or differentiate additional parts. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc. Used when the component is not fully removed from the vehicle but only hung to the side. Used for standard tools and special tools. Used as background color for vehicle components. Used for accessory components.
|
| | |
| | IMG-442423 |
|
| | Clean the Bumper Cover surface. Use: , Isopropanol
|
| | IMG-442452 |
|
| | Remove the screws. The part is not to be reused. |
| | |
| | IMG-442569 |
|
| | Remove the protective film. |
| | IMG-448555 |
|
| | Caution! Make sure that the components are positioned correctly. |
Install component that comes with the accessory kit. |
| | IMG-442578 |
|
| | Locate relevant marking. Make a hole, using the tool indicated. |
| | IMG-442581 |
|
| | Install components that come with the accessory kit. Use: Pop rivet pliers
|
| | IMG-442593 |
|
| | Remove the marked detail/details. |
| | IMG-453132 |
|
| | Fold the protective film forward |
| | IMG-442628 |
|
| | Install component that comes with the accessory kit. Ensure that all clips engage. |
| | IMG-453134 |
|
| | Note! Ensure that the tape is fixed to the surface. |
Remove the protective film. |
| | IMG-442635 |
|
| | Install components that come with the accessory kit. Tighten the bolts. |
| | IMG-442647 |
|
| | Install component that comes with the accessory kit. |
| | Repeat the steps when installing accessories on opposite side. |
| | |
| | IMG-460265 |
|
| | Remove the screws. The part is to be reused. |
| | IMG-408302 |
|
| | Remove the screws. The part is to be reused. |
| | |
| | IMG-455010 |
|
| | Caution! Use suitable tape to protect the components. |
Note the position. Use: , Tape
|
| | IMG-408330 |
|
| | Note! The clips consist of two parts. |
Loosen the clips. |
| | IMG-442738 |
|
| | Loosen the clip. Use special tool: T9997390, Key
|
| | IMG-442767 |
|
| | Loosen the clips. Remove the marked part. |
| | IMG-459136 |
|
| | Caution! Check the component. If it displays any type of damage, it must be replaced. |
|
| | IMG-459139 |
|
| | Caution! Check the component. If it displays any type of damage, it must be replaced. |
|
| | IMG-408475 |
|
| | Remove the fasteners. Use special tool: T9995919, PULLER (SEAL-PINION,CAM-CRANKSHAFT)B200-6304
|
| | IMG-442769 |
|
| | Caution! The part is to be reused. |
Loosen the clips. Remove the marked part. |
| | |
| | IMG-453971 |
|
| | Remove the taped component |
| | IMG-442820 |
|
| | Caution! Use suitable tape to protect the components. |
Note the position. Use: , Tape
|
| | IMG-442845 |
|
| | Caution! Make sure not to damage painted surfaces. |
Install component that comes with the accessory kit. |
| | IMG-442866 |
|
| | Press until a click is heard. Ensure that all clips engage. |
| | IMG-442874 |
|
| | Press until a click is heard. Ensure that all clips engage. |
| | IMG-442880 |
|
| | Press until a click is heard. Ensure that all clips engage. |
| | IMG-442925 |
|
| | Press until a click is heard. Ensure that all clips engage. |
| | IMG-442928 |
|
| | |
| | IMG-444584 |
|
| | Fold the protective film forward |
| | IMG-442971 |
|
| | Note! Do not fully tighten the bolt. |
Install component that comes with the accessory kit. Install the screw. |
| | IMG-442962 |
|
| | Note! Adjust the position of the components to create even spaces. |
Tighten the screw. |
| | IMG-442973 |
|
| | Note! Ensure that the tape is fixed to the surface. |
Remove the protective film. |
| | IMG-460269 |
|
| | Press the marked component. Tighten the screw. Tighten the screw.
|
| | IMG-408302 |
|
| | |
| | IMG-408630 |
|
| | Reinstall the removed part. |
| | IMG-442775 |
|
| | Reinstall the removed part. Ensure that all clips engage. |
| | |
| | Repeat all method steps for the other side. |
| | |
| | IMG-441817 |
|
| | Remove the marked detail/details. |
| | IMG-441820 |
|
| | Remove the screws. Remove the marked part. |
| | IMG-441821 |
|
| | Clean the Bumper Cover surface. Use: , Isopropanol
|
| | |
| | IMG-442070 |
|
| | Remove the protective film. |
| | IMG-441970 |
|
| | Caution! Make sure that the components are positioned correctly. |
Install component that comes with the accessory kit. |
| | IMG-441984 |
|
| | Locate relevant marking. Make a hole, using the tool indicated. |
| | IMG-441998 |
|
| | Install components that come with the accessory kit. Use: Pop rivet pliers
|
| | IMG-442020 |
|
| | Remove the marked detail/details. |
| | IMG-442365 |
|
| | Fold the protective film forward |
| | IMG-442087 |
|
| | Install component that comes with the accessory kit. Ensure that all clips engage. |
| | IMG-442089 |
|
| | Install components that come with the accessory kit. |
| | IMG-442383 |
|
| | Note! Ensure that the tape is fixed to the surface. |
Remove the protective film. |
| | IMG-442091 |
|
| | Remove the screw. The part is not to be reused. |
| | IMG-442209 |
|
| | Note! Do not fully tighten the bolt. |
Install components that come with the accessory kit. |
| | IMG-442217 |
|
| | Note! Adjust the position of the components to create even spaces. |
Tighten the screw. |
| | IMG-442220 |
|
| | |
| | IMG-442221 |
|
| | Remove the marked detail/details. |
| | IMG-442322 |
|
| | |
| | IMG-454015 |
|
| | Fold the wing liner aside. |
| | IMG-454016 |
|
| | Mark the centre. Use: Scribe
Make a hole, using the tool indicated. |
| | IMG-454030 |
|
| | Install component that comes with the accessory kit. |
| | IMG-442322 |
|
| | |
| | IMG-444603 |
|
| | Fold the protective film forward |
| | IMG-442346 |
|
| | Note! Do not fully tighten the bolts. |
Install components that come with the accessory kit. |
| | IMG-442348 |
|
| | Note! Adjust the position of the components to create even spaces. |
Tighten the bolts. |
| | IMG-444613 |
|
| | Note! Ensure that the tape is fixed to the surface. |
Remove the protective film. |
| | Repeat the steps when installing accessories on opposite side. |
| | |
| | Reinstall the removed parts in reverse order. |
| | IMG-405228 |
|
| | Note! Make sure to follow the sequence indicated. |
Tightening torque: Aluminum wheel rim to wheel hub Stage 1:
4 Nm Stage 2:
50 Nm Stage 3:
140 Nm
|